807535
18
Zoom out
Zoom in
Previous page
1/92
Next page
18
DE EN
HINWEIS! Beachten Sie das Maß (A), um den Propeller nach der Montage mon-
tieren und demontieren zu können und um genügend Raum für den Faltpropeller
zu schaffen wenn Sie einen Faltpropeller verwenden.
1. Bereiten Sie das Boot für den Einbau des Motors vor, stellen Sie dabei
sicher, dass die erforderlichen Maße der Bohrungen korrekt sind.
2. Stellen Sie sicher, dass das Maß (A) zwischen Motor und Ruderblatt min-
destens 450mm beträgt.
Ausgleichsblock vorbereiten
WL
1
HINWEIS! Bearbeiten Sie nur die Seite des Ausgleichsblocks, die Kontakt zum
Bootsrumpf hat. Die Seite die Kontakt zum Einbauansch hat, muss unbearbeitet
bleiben.
1. Bearbeiten sie den Ausgleichsblock (1) so, dass der Motorschaft (2) in mon-
tiertem Zustand senkrecht zur Wasserlinie steht.
2. Achten Sie bei der Bearbeitung darauf, dass die Auageäche des Aus-
gleichsblocks ächig auf dem Bootsrumpf auiegt.
Einbauansch einbauen
TIPP! Die nächsten Arbeitsschritte erfordern gleichzeitiges Handeln im Inneren
und Äußeren des Bootes. Nehmen Sie sich eine Person zur Hilfe oder bereiten
Sie geeignetes Stützmaterial vor, um den Einbauansch am Rumpf zu sichern
während die Muttern im Inneren eingebaut werden.
Je nach verwendetem Dichtmittel und Umgebungsbedingungen können die
Verarbeitungszeiten des Dichtmittels sehr kurz sein. Bereiten Sie deshalb alle
Werkzeuge und Materialien vor und führen Sie ggf. einen Probeversuch ohne
Dichtmittel durch, um ein optimales Ergebnis zu erzielen. Nutzen Sie die Probe
dazu, die Flächen am Rumpf und am Einbauansch, die nicht mit Dichtmittel be-
handelt werden sollen, zu schützen und kleben Sie diese mit Klebeband ab.
3
1
4
6
5
7
2
1. Bereiten Sie die Oberäche des Bootsrumpfes vor, beachten Sie dabei die
Herstellerangaben des verwendeten Dichtungsmittels.
2. Tragen Sie das Dichtungsmittel auf die Flächen (1) und (2) des Ausgleichs-
blocks (3) auf.
3. Positionieren Sie den Ausgleichsblock auf dem Einbauansch (4), beachten
Sie dabei, dass die bearbeitete Seite nach oben zum Bootsrumpf gerichtet
ist.
4. Tragen Sie Dichtmittel auf die Bohrlöcher im Bootsrumpf auf.
5. Führen Sie den Einbauansch in den Bootsrumpf ein und halten Sie ihn in
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 3.0 FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 3.0 FP in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 3.0 FP

Torqeedo Cruise 3.0 FP User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 3.0 FP User Manual - French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info