807531
83
Zoom out
Zoom in
Previous page
1/121
Next page
Start-up EN DE
In order to position the motor optimally relative to the water surface, several steps
are required:
1. Use the tilt switch to tilt the motor upwards hydraulically, see Chapter 6.4, "Tilt
buttons".
2. Remove the securing cotter pin (1) of the trim rod (3), and pull the trim rod (3)
out of the transom bracket.
3. Select the desired trimming position.
4. Insert the adjusting rod (3) into the corresponding trimming position (2) of the
transom bracket.
The trim rod (3) must be pushed through both side walls of the transom
bracket.
5. Fix the trim rod (3) using the securing cotter pin (1).
6. Hydraulically tilt the motor downwards using the tilt switch until contact is made
with the trim rod (3).
5.5 Choice of batteries
For reasons of efficiency and user-friendliness, Torqeedo recommends the use of
Power 48 5000 lithium batteries. In principle, the Cruise models can also be operated
using lead/acid, lead gel, AGM, or lithium-based batteries.
WARNING!
Danger of injury from batteries which are unmatched.
This can result in severe physical injuries or death.
Connect only identical batteries (manufacturer, capacity and age).
Connect batteries only if they have an identical state of charge.
WARNING!
Danger of injury from short circuit.
This can result in severe physical injuries or death.
Remove metal jewellery before you start work on batteries or in their vicinity.
Always put down tools and metal objects without making contact with the
battery.
When connecting the battery, ensure correct polarity and tight fit of the con-
nections.
Battery terminals must be clean and free of corrosion.
Do not store batteries hazardously in a box or drawer, e.g. an insufficiently
ventilated locker.
CAUTION!
Damage to the battery or other electrical loads from a short circuit.
Material damage can result.
When working on the batteries, always switch the system off at the main
switch.
If you are using a Torqeedo Power 48 5000, then this must also be switched
off.
When connecting the batteries, ensure that you first connect the red positive
cable followed by the black negative cable.
When disconnecting the batteries, ensure that you first disconnect the black
negative cable followed by the red positive cable.
Never transpose the polarities.
ADVICE
Do not lead the cables over sharp edges, and cover all open terminal caps.
5.5.1 Comments on choice of batteries
In principle, Torqeedo recommends the use of Power 48 5000 lithium batteries.
page 83 / 121
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 10.0 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 10.0 T in the language / languages: English, German as an attachment in your email.

The manual is 7.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 10.0 T

Torqeedo Cruise 10.0 T User Manual - Dutch, French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info