710114

Tormatic PowerSwing Manual

15
Zoom out
Zoom in
Previous page
1/20
Next page
PowerSwing
Instructions for use
3
ENGLISH
Read the instructions carefully before using the product and
store them for future use.
The user must not in any way attempt to repair or to take direct
action and must solely contact qualified personnel or service
centres.
GENERAL SAFETY REGULATIONS
If correctly installed and used, the PowerSwing automated system
will ensure a high degree of safety. Some simple rules on behaviour
can prevent accidental trouble:
• Do not stand near the automated system, and do not allow chil-
dren, persons or things to do so, especially when it is operating.
• Keep radio-controls, or any other pulse generators that could invo-
luntarily activate the automated system, well away from children.
• Do not allow children to play with the automated system.
• Do not willingly obstruct gate movement.
• Prevent any branches or shrubs from interfering with gate mo-
vement.
• Keep the indicator-lights efficient and easy to see.
• Do not attempt to activate the gate by hand unless you have
released it.
• In the event of malfunctions, release the gate to allow access and
wait for qualified technical personnel to do the necessary work.
• When you have set manual operation mode, cut power to the
system before restoring normal operation.
• Do not in any way modify the components of the automated
system.
• Do not attempt any kind of repair of direct action whatever and
contact qualified personnel only.
• At least every six months: arrange a check by qualified personnel
of the automated system, safety devices and earth connection.
DESCRIPTION
The PowerSwing automated system for swing gates is an electro-me-
chanical operator that transmits motion to the leaf via a worm
screw system.
The non-reversing model ensures mechanical locking of the leaf
when the motor is not operating. A convenient and reliable release
with customized key makes it possible to move the leaf by hand in
the event of malfunction or power failure.
The operator, if correctly installed, ensures an installation in com-
pliance with the current safety regulations.
The automated system includes safety devices (photocells) that
prevent the gate from closing when there is an obstacle in the
area they protect.
The warning-light indicates that the gate is currently moving.
MANUAL OPERATION
If the automated system needs to be moved manually due to a
power lack or to an operator malfunction, proceed as follows:
1. Cut power by means of the safety circuit breaker (even in the
event of a power lack).
2. Slide the protective cap, Fig. 1 - a.
3. Insert the key and turn it 90°, Fig. 1 - b.
4. Lift the control lever, Fig. 1 - c.
5. To release the operator turn 180° the control lever to the di-
rection indicated by the arrow on the release system, Fig. 1 - d.
6. Open and close the leaf manually.
To hold the operator in manual operation the release device
should be left in its current positions and the system should
be without power.
RESTORING NORMAL OPERATION
To restore normal operating conditions, proceed as follows:
1. Make sure that the system is not powered.
2. Turn the release system 180° in the opposite direction of the
arrow.
3. Turn 90° the release key and remove it.
4. Close the control lever and the protection cover.
5. Make sure that the gate cannot be moved manually.
6. Power up the system and perform some movements in order
to check the correct restoring of every function of the auto-
mated system.
MAINTENANCE
In order to ensure correct operation and constant safety over time,
make a general check of the system every six months, paying
special attention to the safety devices. In the booklet “User gui-
de”, a form has been prepared for the recording of maintenance
operations.
REPAIRS
The user must not in any way attempt to repair or to take direct
action and must solely contact qualified personnel or service
centres.
AVAILABLE ACCESSORIES
For accessories, see the TORMATIC
®
catalogue.
Fig. 1
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tormatic PowerSwing at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tormatic PowerSwing in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info