710115
6
Zoom out
Zoom in
Previous page
1/57
Next page
Dismantling
Dismantling takes place in reverse sequence to the Installation
Instructions 7- 1.
Producer: Novoferm tormatic GmbH
Eisenhüttenweg 6
D-44145 Dortmund
Notices
GB
General Information
Safety
Before commencing any work on the product, carefully read
through the operating instructions from start to finish, in particular
the section entitled "Safety" and the related safety advice. It is
important for you to have understood what you have read. This
product could prove hazardous if not used properly as directed or
in accordance with the regulations.
Any damage occurring as a result of noncompliance with these
instructions shall render the manufacturer's liability null and void.
ATTENTION
IMPORTANT SAFETY ADVICE
TO ENSURE THE SAFETY OF PERSONS, IT IS NECESSARY
TO OBSERVE THESE INSTRUCTIONS.
RETAIN THESE INSTRUCTION MANUAL.
ATTENTION
IMPORTANT INSTRUCTIONS TO ENSURE A SAFE
INSTALLATION.
PLEASE OBSERVE THESE INSTRUCTIONS.
INCORRECT INSTALLATION COULD LEAD TO SERIOUS
INJURIES.
Changes and modifications to the product
To prevent hazards and ensure optimum performance, no
changes, modifications or conversions may be made to the
product that have not been expressly approved by the
manufacturer.
Working safety
By complying with the safety advice and information provided in
these Operating Instructions, injury to persons and damage to
property whilst working on and with the product can be avoided.
Failure to observe the safety advice and information provided in
these Operating Instructions as well as the accident prevention
and general safety requirements relevant to the field of
application shall exempt the manufacturer or ist authorized
representatives from all liability and shall render any damage
claims null and void.
Hazards that may emanate from the product
The product has been subjected to a risk assessment. The
design and execution of the product based on this
corresponds to state-of-theart technology.
When used properly as intended, the product is safe and
reliable to operate.
Nevertheless, a residual risk will always remain!
The product runs on a high electrical voltage.
Before commencing any work on electrical
systems, please observe the following:
1. Disconnect from the power supply
2. Safeguard to prevent a power restart
3. Check that the electricity supply is cut off
Explanation of the symbols
WARNING: imminent danger
This symbol indicates that instructions are
being given which, if not observed,
could lead to serious injury
WARNING: DANGER DUE TO ELECTRIC
VOLTAGE. The works have to be done by an
electrican.
Attention! This symbol indicates that
instructions are being given which, if not
observed, could lead to malfunctions and / or
failure of the operator.
!
Spare parts
Only use genuine spare parts of the
manufacturer.Wrong or faulty spare parts
can cause damage, malfunctions or even
a total failure of the product.
Disposal
Observe the corresponding country-specific regulations.
Packaging
Always dispose of the packaging in an environmentally-friendly
manner and in accordance with the local regulations on
disposal.
Data plate
The data plate is located under the control panel cover.
Observe the specified power rating.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tormatic NovoSwing at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tormatic NovoSwing in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info