199979
54
Zoom out
Zoom in
Previous page
1/71
Next page
53
Establishing an Infrared Connection
1. Make sure that your infrared port is set to the same protocol as the
target infrared device. You can change the infrared port in the
setup utility (see chapter 3).
2. Place your notebook so that the infrared port is directly facing the
infrared port of the target device. If the angle between the ports
exceeds about 15 degrees in any direction, you might fail to
establish communication. The infrared ports should be no more
than 1 meter (38 inches) apart. If the separation is greater than 1
meter, you might fail to establish communication.
3. If you have utility software that supports infrared communication,
such as TranXit or IntelliSync, use the software to make the
infrared link, and follow the instructions of the software.
4. If you don’t have infrared software, use the infrared software
included with the Windows operating system, as described below.
Using Infrared with Windows
You can use the Windows 95 operating system to operate your infrared
port as follows.
If you have not already set up your system for a Direct Cable
Connection or for file sharing, you will need to do this first.
Infrared Port
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topline amicus 3200 c 667 6000 note 64mb 13 3 tft cel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topline amicus 3200 c 667 6000 note 64mb 13 3 tft cel in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info