636410
28
Zoom out
Zoom in
Previous page
1/60
Next page
26
1) Changing Masking Mode
Sets up masking (laser beam shutter) and change shut off directions.
Masking (Laser beam shutter) setting
Depending on the status of the location where the instruments are used, laser beam emission to
unnecessary direction can be shut off.
1 Press the [MENU] key to display the menu
screen.
The mask setting will be displayed on the right
in the upper side of the screen.
2 Use the arrow keys to position on the Mask
display and press the [ENT] key.
3 Select the direction you desire to mask using
the arrow keys.
Each press repeats mask activating/
releasing.
4 When desired masking is displayed, press the
[ENT] key to finish.
Confirm the [OK] mark on the display.
The state when masking is not activated
(Laser beams are emitted to all directions.)
The status in which the X+ direction is masked.
(Laser beam is shut off in the X+ direction.)
Displays the direction that laser beam
is emitted.
Displays the masking direction
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcon RL200 1S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcon RL200 1S in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info