462234

Topcom ULTRA SR1250 ECO Manual

5
Zoom out
Zoom in
Previous page
1/88
Next page
5
Ultra SR1250 Handset - settings and operation
ENGLISH
3.3 Event LED
The front handset LED at the upper left indicates the following:
• Blinking fast: incoming call.
• Blinking slow: intercom call or paging.
• Blinking every 2 seconds: there are new event message in handset
(see second text line on the display).
3.4 Menu structure
The handset has an easy-to-use menu structure. Every menu opens a list
of options.
To open the main menu, press the menu key when the handset
is on and in standby mode.
Press the up or down key to scroll through to the menu option
you want. The instructions in this user guide show the key symbols and the
position number on the device overview. Then press the menu key
again to open other options or to confirm the setting that is displayed.
Exit menu or go up a menu level
Press escape key ESC to go to the previous menu option.
You can press the ESC key at any time to cancel and return to standby
mode.
4 Handset - settings and operation
4.1 Powering up (Set up mode)
At the first insertion of the battery or after a reset operation, the handset
shall enter the set up mode. The user should select the country for various
country dependent settings:
1. ‘WELCOME’ is shown.
2. Press to go to the country setting menu.
3. Use or to select the country.
4. Press to confirm.
5. Press again to confirm or press the escape key ESC
to go back.
6. Use or to select the language
7. Press to confirm.
8. Enter the date and press to confirm.
9. Enter the time and press to confirm.
4.2 Switching the handset on/off
1. Press the on/off key until the display turn on.
2. To switch off the handset, hold down the on/off key for more
than 5 seconds until the device switches off.
4.3 Menu language selection
The telephone has 14 menu languages, to set the language, proceed as
follows:
1. Press .
2. Press or repeatedly, select ‘HS SETTINGS’.
3. Press to confirm.
4. Press or repeatedly, select ‘LANGUAGE’.
5. Press to confirm.
• The language setting appears in the display
6. Press or repeatedly, select the desired language.
• Press to confirm.
4.4 Making calls
4.4.1 External calls
1. Press .
• The call symbol appears in the display.
2. When you hear the dialling tone, dial the telephone number you want.
• The number appears in the display and is dialled.
3. To end the call, press or (if auto hang-up is set on) replace
the handset on the base station.
4.4.2
Call preparation
1. Enter the telephone number you want to call.
2. To correct the number, press ESC .
3. Press .
• The call symbol appears in the display.
The steps below show the key and display symbols and the
position numbers on the device overview.
18
17
4
15
17
3
3
3
17
17
17
6
6
17
4
17
4 15
17
4 15
17
14
6
14
HL_Ultra SR1250 eco D73.book Page 5 Wednesday, July 28, 2010 12:39 PM
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom ULTRA SR1250 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom ULTRA SR1250 ECO in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info