483952
8
Zoom out
Zoom in
Previous page
1/123
Next page
8
Twintalker 9500
13.10.3 Scanning for a DCS code
Once there is a transmission on the channel, the DCS code (if used) will be detected and
displayed.
13.11 Call Tones
A call tone alerts others that you want to start talking.
13.11.1 Setting the Call Tone
The Twintalker 9500 has 15 call tones.
13.11.2 Sending a call Tone
Press the button briefly. The call tone will be transmitted on the set channel.
13.11.3 Call tone reception type
Press the -button nine times.
Press the -button or -button to select the call tone reception type.
1. Tone only
2. Tone + vibration
3. Vibration only
Press the -button to confirm and return to stand-by mode.
13.12 Roger Beep On/Off
After the -button is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
• Press the - button ten times.rO’ will be displayed.
• Press button to enable (ON) or button to disable the Roger-
Beep (OFF).
• Press the - button to confirm your selection and return to the
standby mode.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press button eleven times. ‘tO’ will be displayed.
• Press button to enable (ON) or button to disable the Key
Tones (OFF).
• Press the - button to confirm your selection and return to the.
standby mode.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one channel with CTCSS/DCS code. The PMR will only receive
signals transmitted on that channel with the CTCSS/DCS code.
Dual Channel Monitor (DCM) allows you to monitor a second channel with CTCSS/DCS code.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially between
the standby channel + CTCSS/DCS code and the Dual Channel + CTCSS/DCS code.
Press the -button seven times : "SCAN" and "DCS
00" flashes on the display for the selected radio channel.
Press the -button or the -button to start the
DCS scan.
Press the - button eight times, “C” is displayed and
the current call tone is flashing.
Press the - button
or the - button to change to
another Call Tone.
Press the - button to confirm and return to stand-by
mode.
If you press the button while listening to a found CTCSS
code, the PMR will go back in stand-by mode on the channel with
the CTCSS code.
If no CTCSS code is detected there is a chance that DCS is
selected by the user. In this case you can scan for the DCS code.
(section 13.10.3)
PTT
12
7
11
10
If you press the button while listening to a found DCS code, the
PMR will go back in stand-by mode on the channel with the DCS code.
PTT
12
7
11
10
PTT
12
6
7
11
10
PTT
12
Press the -button twelve times,” DCM OFF" will
flash on the display.
Press the -button or the -button to change the
channel.
Press the -button to confirm the channel selection
and go to CTCSS selection. (Press the -button
again to go to DCS selection)
Press the -button or the -button to change
the CTCSS code or DCS code.
Press the -button to confirm and return to stand-by
mode.
To disable the function select "OFF" when selecting the
DCM channel.
PTT
12
7
11
10
PTT
12
7
11
10
PTT
12
7
11
10
7
7
11
10
PTT
12
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Twintalker 9500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Twintalker 9500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info