483958
9
Zoom out
Zoom in
Previous page
1/148
Next page
9Twintalker 9500 Airsoft Edition
ENGLISH
13.10.3 Scanning for a DCS code
Once there is a transmission on the channel, the DCS code (if used) will
be detected and displayed.
13.11 Call Tones
A call tone alerts others that you want to start talking.
13.11.1 Setting the Call Tone
The Twintalker 9500 has 15 call tones.
13.11.2 Sending a call Tone
Press the button briefly. The call tone will be transmitted on the
set channel.
13.11.3 Call tone reception type
Press the -button nine times.
Press the -button or -button to select the call tone
reception type.
1. Tone only
2. Tone + vibration
3. Vibration only
Press the -button to confirm and return to stand-by mode.
13.12 Roger Beep On/Off
After the -button is released, the unit will send out a roger beep
to confirm that you have stopped talking.
To set the Roger Beep.
•Press the - button ten times. ‘rO’ will be
displayed.
•Press button to enable (ON) or
button to disable the Roger-Beep (OFF).
•Press the - button to confirm your
selection and return to the standby mode.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
•Press button eleven times. ‘tO’ will be
displayed.
•Press button to enable (ON) or
button to disable the Key Tones (OFF).
•Press the - button to confirm your
selection and return to the standby mode.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one channel with CTCSS/DCS code. The
PMR will only receive signals transmitted on that channel with the
CTCSS/DCS code.
Press the -button seven times :
"SCAN" and "DCS 00" flashes on the
display for the selected radio channel.
Press the -button or the -
button to start the DCS scan.
If you press the button while listening to a
found DCS code, the PMR will go back in stand-by mode
on the channel with the DCS code.
Press the - button eight times,
C” is displayed and the current call tone
is flashing.
Press the - button
or the -
button to change to another Call
Tone.
Press the - button to confirm
and return to stand-by mode.
7
11
10
PTT
12
7
11
10
PTT
12
6
7
11
10
PTT
12
12
7
11
10
12
7
11
10
12
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Twintalker 9500 - RC 6406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Twintalker 9500 - RC 6406 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info