483960
4
Zoom out
Zoom in
Previous page
1/47
Next page
4
Protalker 1116
6 Using a PMR 446 Mhz radio
To communicate between PMR devices they need to be set all on the same frequency +
sub-channel code and within receiving range (up to max. 10 km in ideal conditions).
Since the PT-1116 operates on licence free 446 MHz fre
quencies, all other licence free 446 MHz
PMR radio's will operate on the same radio frequencies. Therefore, privacy is not guaranteed.
Anybody with a PMR set to your radio frequency can overhear the conversation.
If you want to communicate (transmitting a voice sign
al) you need to press the PTT-button .
Once this button pressed, the device will go into transmit mode and you can speak into the
microphone. All other PMR devices in range , on the
same channel and in standby mode (not
transmitting) will hear your message. You need to wait until the other party stops transmitting
before you can reply to the message. To reply, just press the PTT-button and speak into the
microphone..
If 2 or more users press the PTT- button at the same time the receiver will
receive only the stongest signal and the other signal(s) will be supressed.
Therefore you should only transmit a signal (press PTT- button) when the
channel is free.
The range of radio waves is strongly affected by obstacles such as
buildings, concrete/metal structures, the unevenness of the landscape,
woodland, plants, humidity … This implies that the range between two or
more PMR's may in some extreme cases be restricted to a maximum of a few
tens of meters. You will soon notice that PMR works best when there is a
minimum of obstacles between users.
7 Included in the package
1 x Protalker PT-1116
1 x Beltclip
1 x Desktop Charger
1 x Power adapter
1 x Li-ion battery
1 x ECO User guide
8 Getting started
8.1 Installing the battery pack
Align the battery pack with the back of the PMR body. Press
the battery pack and PMR body firmly together until the
release latch locks up the battery.
8.2 Removing the battery pack
While pressing the release latch, pull the battery pack away
from the PMR body
8.3 Installing the belt clip
Remove the screw on the back of the radio, put the clip
button on, and fix it with the screw.
Match the grooves of the belt cli
p with the button, push the
belt clip downwards until it is locked.
8.4 Removing the belt clip
Push the spring of the belt clip supporter downwards and
push the belt clip puwards to remove it from the radio.
8.5 Installing the hand strap
Slide the small loop of the hand strap through the strap hole
on the upper rear of the PMR body.
Pull the entire hand strap through the small loop to secure
the hand strap in place.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Protalker PT-1116 - RC 6421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Protalker PT-1116 - RC 6421 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info