Manual Topcom power lan 200 ethernet kit (page 10 of 128) (English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish)

238148

Zoom out

Zoom in

1/128

POWERLAN 200 TURBO

USER GUIDE

HANDLEIDING

MODE D’EMPLOI

MANUAL DE USUARIO

BRUKSANVISNING

BRUGERVEJLEDNING

ANVÄNDARHANDBOK

KÄYTTÖOHJE

MANUAL DO UTILIZADOR

1.3

UK The features described in this manual are published with reservation to

modifications.

NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd

onder voorbehoud van wijzigingen.

F Les possibilités décrites dans ce manuel sont publiées sous réserve de

modifications.

D Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden

vorbehaltlich Änderungen publiziert.

ES Las características descritas en este manual pueden ser objeto de futuras

modificaciones.

SE Funktionerna i denna bruksanvisning publiceras med reservation för

ändringar.

DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet

i denne brugsanvisning.

NO Funksjoner beskrevet i denne manualen kan endres uten nærmere

informasjon.

FI Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman

ennakkoilmoitusta.

UK The CE symbol indicates that the unit complies with the essential

requirements of the R&TTE directive.

NL Het toestel voldoet aan de basiseisen van de R&TTE-richtlijn. Dit wordt

bevestigd door de CE-markering.

FR La conformité de l’appareil avec les exigences fondamentales de la

directive européenne R&TTE relative aux terminaux, est confirmée par le

label CE.

DE Die Übereinstimmung des Gerätes mit den grundlegenden Anforderungen

der R&TTE-Directive ist durch das CE-Kennzeichen bestätigt.

ES El sello CE corrobora la conformidad del equipo con los requerimientos

básicos de la directiva R&TTE.

SE CE-märket bekräftar att apparaten uppfyller de grundläggande kraven i

R&TTE direktivet.

DK CE-mærkningen bekræfter, at produktet er i overensstemmelse med

kravene i Rådets teleterminaldirektiv.

NO CE-merkingen dokumenterer at apparatet er i samsvar med de

grunnleggende kravene til EU-direktivet for aktivt

telekommunikasjonsutstyr.

FI Laite noudattaa R&TTE-direktiivien vaatimuksia, mikä on vahvistettu CE-

merkillä.

PT O símbolo CE indica que esta unidade cumpre com os requisitos

essenciais da directiva R&TTE.

This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.

The Declaration of conformity can be found on :

http://www.topcom.net/support/cedeclarations.php

PowerLan 200

ENGLISH

Important

Network Volume

The maximum number of PowerLan 200 adaptors in a single-family house is

theoretically 253 connections, but in practice no more than 10 devices should

be transferring data simultaneously.

Network Security

The PowerLan products will immediately work after unpacking and plugging

them into the power connection of your home, even without any software

installation and configuration.

Normally the electric meter forms a physical barrier, i.e. only devices connected

to this meter can be part of the network and benefit from the phase coupling.

We strongly recommend that you use the PowerLan 200 Ethernet Adaptor

internal device encryption. It is configured with the PowerLan 200 Ethernet

Adaptor Configuration Utility.

1 Typical applications

,QKRXVH

SRZHUVXSSO\

'6/&$%/(PRGHPURXWHU$'6/&$%/(PRGHPURXWHU

,17(51(7

(7+(51(7

PowerLan 200

2 LED's and connections

PWR: On when connected to AC power supply.

PL-ACT: On when detected and connected with another PowerLan

adaptor within the network.

ETH-LINK/ACT: Lights up when connected to the Ethernet port of the

computer or other Ethernet devices.

Blinks during data transfer.

ETHERNET: This is the connection point for connecting it to a computer

or other devices with Ethernet port.

,QKRXVH

SRZHUVXSSO\

,17(51(7

$'6/&$%/(PRGHPURXWHU

(7+(51(7

PowerLan 200

ENGLISH

3 Utility Installation

1. Turn on the computer. Insert the CD into the CD-ROM Drive. The Autorun

screen will automatically appear:

Please click "Install Software".

2. InstallShield Wizard will automatically start.

Please click "Next" to continue and follow further instructions.

PowerLan 200

click OK.

Please click "Finish" to finish the installation.

PowerLan 200

ENGLISH

4 Configuration

Start the Utility:

To start the utility, double click the PowerPacket Utility icon on your desktop.

Main Screen

The Main screen provides a list of all PowerLan devices connected to the

computer where the utility is running.

The top panel shows all local PowerLan devices connected to the computer's

NIC (Network Interface Card). In most cases, only one device will be seen. If

more then one device is connected, the user can select the device and click the

Connect button. The status area above the button indicates that your PC is

connected.

The lower panel displays all the PowerLan devices, discovered on the current

logical network (remote devices). Displayed above this panel is the number of

remote devices found, the type of logical network (Public or Private), and a

message area that reports the connectivity and scan status.

PowerLan 200

The following information is displayed for each device discovered :

• Device Name : shows the default device name. A user may change the

name by clicking the name, or by using the Rename button.

An icon is optionally shown with the name. A distinction in icons is made

between low-speed and high-speed devices (14 Mbps or 85 Mbps devices)

• MAC Address : shows the device's MAC address.

• Password : shows the user-supplied device password (initially left blank). A

user may enter the password by using the Enter Password button.

To enter the Password of the device (required when creating a private

network), first select the device by clicking on it's name in the lower panel and

then click on the Enter Password button. A dialog box will appear. The

selected device name is shown. Now enter the password. (The password is

located at the bottom label of the device). Click OK to confirm the password.

A confirmation box will appear if the password was entered correctly.

The Add button is used to add a remote device to your network that is not on

the displayed list in the lower panel, for example, a device currently on another

logical network. Users are advised to locate the passwords for all devices they

wish to manage and add them to the local logical network by clicking on the

Add button. A dialog box will appear. Now enter both a device name and the

password.

PowerLan 200

ENGLISH

A confirmation box will appear if the password was entered correctly and if the

device was found.

Note:

The device must be present on the power line (plugged in) in order for the

password to be confirmed and added to the network. If the device could not be

located, a warning message will be shown.

The Scan button is used to perform an immediate search of the PowerLan

devices connected to the computer. By default the utility automatically scans

every few seconds and updates the display.

Privacy Screen

The Privacy dialog screen is used for managing the security of the local

network. All PowerLan devices are shipped using a default logical network

(network name), which is normally "HomePlug". The Privacy dialog screen

allows user to make the network private by changing the network name

(network password) of devices. The user can always reset the network

password to default (HomePlug) by clicking on the Use Default button.

PowerLan 200

Note:

Changing the network name to any other name other than HomePlug will show

the network type on the main screen as Private.

The Set Local Device Only button is used to change the network name

(network password) for the local device connected directly to the computer.

After doing this, all the devices seen on the Main panel prior to this will no

longer be able to communicate or respond to the computer, as they will be on

a different logical network. Devices previously set up with the same logical

network (same network name) will appear in the device list afterward selecting

this option.

The Set All Devices button is used to change the logical network of all devices

that appear on the Main panel. The user must have entered the device's

Password in order to set it to the new logical network. A notification message

will appear to report the success of this operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom power lan 200 ethernet kit in the language / languages: English, German, Dutch, Danish, French, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom power lan 200 ethernet kit Manual

Product: