300692
13
Zoom out
Zoom in
Previous page
1/20
Next page
3 OPERATION TELEPHONE
3.1 Tone/Pulse setting
The Phonemaster 100 has been set to tone dialling mode (DTMF). When you press a numerical but-
ton and you still hear the dialling tone, you have to switch to pulse dialling mode by means of the
Tone/Pulse switch at the back of the unit.
3.2 Setting the ringer volume
The ring volume switch is located at the back of the phone. You can choose between high (HI), low
(LOW) or no ringing signal (OFF).
Put the switch on the desired volume level. If you choose (OFF), the phone will not ring when a call
comes in, but the ‘Call’ indicator (LED) will start to burn.
3.3 Flash (R)
P ress the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your
telephone company); or to transfer phone calls when you are using a telephone exchange (PA B X ) .
You can set the desired flash time by means of the Flash time switch at the back of the phone. Yo u
can choose between 100 and 300 ms.
Note : In European countries a flash time of 100 ms is normally used.
3.4 Last number redial
If you want to call back the last dialled telephone number, press the Redial button as soon as you
pick up the handset. The telephone number will be dialled automatically.
3.5 Handsfree calling
It is possible to make a handsfree telephone call with the Phonemaster 100 :
Press the Handsfree button. You hear the dial tone.
Enter the desired telephone number
You can now talk without having to pick up the handset.
Press the Handsfree button again to end the communication.
Note : The volume of the speaker can be set by means of the Volume switch at the right side of the unit.
3.6 Memory numbers
You can program 10 indirect memory numbers (0-9) (max. 16 digits) and 5 direct memory numbers
(M1-M5) in the phone’s memory.
3.6.1. Programming an indirect memory number
Pick up the handset and press the Set button.
Enter the telephone number.
Phonemaster 100
13
Phonemaster 100 05-04-2001 08:59 Page 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom phonemaster 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom phonemaster 100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info