300689
6
Zoom out
Zoom in
Previous page
1/72
Next page
ENGLISH
6
3.9. Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see
Remote Operation).The VIP code is set to '000' by default.
• Press briefly to play the actual VIP code. The internal voice will
playback current VIP code.
• Keep pressed down for 2 secs to change the VIP code.
• Press or to set the first number of the VIP code.
• Press the to confirm the first number
• Press or set the second digit of the VIP code.
• Press to confirm the second number.
• Press or to set the third digit of the VIP code.
• Press to confirm the VIP code. You will hear a long beep. The internal
voice will playback the new VIP code for confirmation.
Note: If you do not press any keys for 20 seconds, the previous VIP code
is saved and the machine automatically exits the VIP setting mode.
4. Operation
If a call is received and the answering machine is turned on, the answering
machine will automatically answer the call after the set number of rings.
If outgoing message 1 has been selected, after the outgoing message, a
beep will be heard and the caller can leave a message (max. 3 minutes).
If outgoing message 2 has been selected, after the beep, the line will
automatically be disconnected. The caller does not have the possibility to
leave a message.
Note: If, during pick-up, nothing is said for 8 seconds, the line will be
automatically disconnected.
Important: Due to noise on your telephone line, it is possible the device
will not disconnect automatically, but record up to max. 3 minutes.
The recording will be interrupted as soon as you pick up a parallel
telephone. If the unit continious recording, press
.
4.1. Recording a Memo
As memo is considered as an incoming message that can be picked up later
by the user. The max. recording time for a memo is 3 minutes.
• Press and hold .
• Record your memo after the beep
• Release to stop recording.
ORF1500 Page 6 Thursday, October 17, 2002 5:02 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom orfeo 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom orfeo 1500 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info