530654

Topcom LF-4705 Manual

5
Zoom out
Zoom in
Previous page
1/92
Next page
5
ENGLISH
TOPCOM Multifunctional Humidifier LF-4705
It is recommended to use soft (distilled - low-mineral) water to minimize lime scale on the
transducer.
Do not remove the water tank when the humidifier is connected to the main power.
When you remove the water tank after usage, there will still be water in the water flume.
Remove the water from the tank and flume when it is not used for a long period.
Clean the water box, spray mouth and water flume if the humidifier is not used for a long period.
Do not position the humidifier near heat sources or direct sunlight.
Do not aim the fume dispenser to furniture, electronic equipment or baby beds.
6 Operation
6.1 On/off
• Press the on/off button on the unit on the remote control to activate the humidifier. The display
lights up and, after a few seconds, the ambient humidity is displayed.
• Press the on/off button again to deactivate the humidifier.
6.2 Empty water tank
If the water tank is empty, the empty water tank indication is displayed.
6.3 Humidity level control
• Press the humidity level button to increase the humidity setting from 40% to 80%. After flashing
for 5 seconds, the LCD display shows the level of ambient humidity .
When the moisture level reaches the pre-set value, the humidifier automatically stops for five
minutes in order to test the humidity in the air.
• Instead of selecting the humidity level 40% to 80%, you can also select ‘- -’ for continuous
operation.
6.4 Warm mist
If the water gets stagnant, it will spray the stagnant water, and any bacteria it contains, into your home.
This is why it is important to clean the tank regularly and refill it with clean water when you haven't been
running it.
To avoid that bacteria are sprayed around in your room, the Multifunctional Humidifier LF-4705 can pre-
heat the water before it is sprayed.
It will take several minutes before the mist will feel tepid. The mist will never feel hot!
• When activating the humidifier, the warm mist function is automatically on. The warm mist icon
is displayed.
• To deactivate the warm mist, press the warm mist button .
6.5 Mist intensity
Press the mist intensity button to change the generated amount of mist. The display will indicate the
mist intensity .
6.6 Ionizer
The air ioniser is a device which uses high voltage to ionise, or electrically negative charge, molecules
of air. Negative ions help freshen and purify bad particles in the air, which are causing allergens such as
pollen, mold spores, dust, and animal dander floating in the air . They help to lift mood, alleviate
depression and seasonal affective disorder and promote a sense of well-being.
When the Humidifier is on:
• Press the Ionizer button to start the ioniser. The ionizer icons blink on the screen.
• Press the Ionizer button again to stop the ioniser.
k
k
e
h
b
d
i
g
n
f
f
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom LF-4705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom LF-4705 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info