Manual Topcom KS-4246 BABYVIEWER (page 6 of 98) (All languages)

640725

Zoom out

Zoom in

1/98

Babytalker 3500 SEDS

10.11 Playing a lullaby

There are 5 pre-programmed lullabies that you can play on the

baby unit.

– To play the currently selected lullaby or stop playback,

press the music button on the baby unit.

– To select a different lullaby, repeatedly press the up

button until the desired lullaby is selected. The

lullaby icon will display the selected lullaby (1 to 5).

– Press the on/off button when the desired lullaby

is selected.

10.12 Switching the night light on and off

– Press the menu button 5 times. The night light

icon is displayed.

– Press the up or down button to switch

the night light “ON” (night light is on) or “OFF”.

– Press the menu button to confirm.

– After 10 seconds the parent unit will switch back to

monitor mode.

10.13 Voice activated transmission (VOX)

During night and to save energy, the KS-4246 can be set in VOX

mode.

In VOX mode, the display will be activated as soon as the

microphone of the baby unit will capture sound.

You can set the sound detection sensitivity (VOX) of the

babyphone. If the sensitivity is set to high, the baby unit will pick

up weaker sounds.

– Press button 6 times. “VOX” is displayed.

– Repeatedly press button or to set the

VOX sensitivity.

– To switch off VOX mode, select “OFF”.

– Press the menu button to confirm.

10.14 Night vision

The camera has 6 high-intensity LED’s for picking up clear images

in the dark. When the build in light sensor measures the

ambient light level as low, the LED’s will automatically activate.

10.15 Registering the parent unit with the baby unit

or register a new camera.

Up to 4 baby units can be registered to one parent unit.

To re-register your baby unit, or register a new baby unit, follow

the procedure below:

– Switch on the parent unit

– On monitor mode, press and hold camera button

for 5 seconds, it will go to registration mode.

– After registration icon comes out, pthe up button

or down button to select the camera

channel [C1] or [C2] or [C3] or [C4] that you want the

baby unit to pair with.

– Press and release the menu button to confirm

which camera number to be registered.

– The Link LED then flashes rapidly for 10 seconds.

– Switch the baby unit ON. Press the pair button once

(at the back of the camera).

– If registration is completed, camera video appears on

LCD screen and return to normal mode. Baby unit will

return to normal mode too.

– If the registration time is expired or registration is failed,

“Out of Range” appears on LCD.

NOTE: If a particular channel had been registered already,

registration.

10.16 Selecting the camera

When more than 1 camera is registered.

On monitor mode:

– Press the camera button briefly. The camera

number is displayed.

– Press the camera button again to select another

camera or select ‘SCAN’. In scan mode, each camera

image will be displayed sequentially.

If only one camera registered, a short press on the camera button

will have no response!

11 Cleaning and maintenance

This section contains important instructions for cleaning and

maintaining the equipment.

Follow these instructions to ensure trouble-free use and prevent

damage to the equipment due to improper maintenance.

11.1 Safety Instructions

11.2 Cleaning

– Clean the equipment with a soft, slightly dampened

cloth.

– Clean soiled connectors and contacts with a soft brush.

– Clean the battery contacts and battery compartment with

a dry, lint-free cloth.

– If the equipment gets wet, switch it off and remove the

batteries immediately. Wipe the battery compartment dry

with a soft cloth in order to minimize potential water

damage. Leave the battery compartment open until it is

completely dry. Do not use the equipment before it is

completely dry.

11.3 Maintenance

– Check the batteries (regular or rechargeable) in the

equipment regularly and replace them when necessary.

– Check the connectors and cables for defects.

12 Troubleshooting

This section provides important instructions for localising and

correcting problems.

Follow these instructions in order to avoid hazards and damage.

12.1 Safety Instructions

The VOX sensitivity is indicated by a black bar on

the display:

- high sensitivity

- low sensitivity

The image changes automatically into black and

white mode under the night vision mode.

16 17

DANGER

Risk of fatal injury due to electric shock!

• Before cleaning the equipment, switch it off and

unplug the power cable from the mains receptacle.

CAUTION

Risk due to leaking battery fluid

Fluid from leaking batteries (regular or rechargeable) can

cause injuries (skin irritation) or damage to the equipment.

Wear safety gloves.

CAUTION

• Do not use cleaning products or solvents. They can

damage the case or seep into the equipment and

cause permanent damage.

CAUTION

• If you suspect that the equipment is damaged, always

have it checked by an expert before using it again.

DANGER

Risk of fatal injury due to electric shock!

• Unplug the power cable before attempting to correct a

problem.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom KS-4246 BABYVIEWER in the language / languages: All languages as an attachment in your email.

The manual is 87,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom KS-4246 BABYVIEWER Manual

Product: