299679

Topcom fidelity sms Manual

10
Zoom out
Zoom in
Previous page
1/140
Next page
10 Topcom Fidelity SMS
8.3 Calling a number a Direct Memory number
• Press the desired Direct Memory key, the stored number is displayed.
•In case you select the VM number, the number is dialled out automatically in handsfree.
• For the other Direct Memories, press handsfree or pick up the handset.
8.4 Changing a number and name of a Direct Memory
The VM Direct Memory cannot be changed or erased only overwritten.
• Press the desired Direct Memory key, the stored number is displayed.
• Press OK to confirm
• Use the scroll switch to select ‘Edit?’.
• Press OK to confirm.
• Edit the telephone number when necessary.
• Press OK to confirm
• Use the scroll switch to select ‘Save M1,M2...?’.
• Press OK to confirm.
• Press the desired Direct Memory key (M1, M2, M3 or VM), ‘Saved’ appears on the display.
8.5 Erasing a number and name from the Direct Memory
• Press the desired Direct Memory key, the stored number is displayed.
• Press OK to confirm
• Use the scroll switch to select ‘Clear?’.
• Press OK to confirm.
9. SMS (SHORT MESSAGES SERVICE)
To use SMS, this service has to be activated on your phone line. Normally you need to call a special number
to get a subscription from your telephone company to activate this function. Please contact your telephone
company for this service.The phone can send and receive SMS messages (maximum 160 characters). Minimum 10
messages will be stored in the In- and Outbox.
9.1 Protocol selection
The Fidelity SMS support 2 SMS protocols (protocol 1 = default)
In the enclosed annex, a list of operators/country indicates which protocol is supported.
In case your telephone operator is not shown, contact them to know the supported protocol.
To set a protocol:
• Remove a batterie
• Press and hold 1 to select Protocol 1 or
• Press and hold 2 to select Protocol 2
• Replace the batterie
• Release the button as soon as the protocol number is shown in the display.
Follow the instruction related to the selected protocol.
9.2 Protocol 1
9.2.1 SMS Settings
Before using the SMS function, you have to change the next settings:
• Nr. SMS Out : Contains the telephone number of the SMS center. This number is needed to send SMS messages
towards the server.
• Nr. SMS In : When the SMS center sends you a new message, this telephone number is send together with the
message. With this information, the telephone knows that it is an incomming SMS.
• Terminal Number : If more SMS devices are on the same telephone line, you can give each device another
terminal number (0-9), so that SMS messages can be send to each device separately. In case the network does
not allow to use an additional Terminal Number, select ‘-’ by pressing the delete key .
• Delivery Mode : Depending on the networkoperator an additional digit must be sent after the Nr. SMS out and the
Terminal Number. In case the network does not support the additional Delivery mode, select ‘-’ by pressing the
delete key .
The settings are different per country and operator. Please check the extra sheet added in this manual for different
countries (ADDENDUM) or contact your local networkoperator.
HL_FidelitySMS.book Page 10 Monday, August 4, 2003 3:38 PM
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom fidelity sms at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom fidelity sms in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info