523803

Topcom FEETWARMER 1000 - FW-4790 Manual

4
Zoom out
Zoom in
Previous page
1/36
Next page
4 TOPCOM Feetwarmer 1000
TOPCOM Feetwarmer 1000
3 Button description
1. Power adapter Jack
2. Heating switch
3. Vibration intensity switch
4 Installation
4.1 Connecting to the main power.
• Plug one end of the power adaptor (12V, 1000mA) into the power adapter jack on top of
the remote controller.
• Plug the other end into the 100-240V mains power socket.
5 Using the massager
• Choose a comfortable chair matching your stature.
• For best use, place the Feet Warmer 1000 on a flat floor.
• Put both feet into the massage slot.
• Set the intensity switch to for low intensity vibration or to for high intensity vibration.
• To deactivate the vibration, set the switch to position ‘0’
• To activate the heating, set the heating switch to position ‘I’.
• To deactivate the heating, set the switch to position ‘0’
6 Technical data
Dimensions (W/H/D) 300 x 340 x 210 mm
Weight 770 g
Power supply
– Input: 100-240 V AC / 50-60 Hz / 1.3A
– Output: DC 12 V / 1000 mA
7 Cleaning
• Remove the fleece lining from the feet massager by opening the zipper.
• Machine washing of the inner lining is possible; however, hand wiping will prolong the life of the lining.
• Place the inner lining in a net bag and seal it.
• Use a small amount of detergent and set the washing machine to a “Delicate Wash” with a maximum temperature of 40°.
• When washed, remove the lining from the net bag and drape it on a clothes line to dry.
•
Allow the blanket to dry naturally.
8Storage
Store the device in its original box on a safe, dry and cool place. Avoid contact with sharp edges or pointed objects which might
cut or puncture the fabric. Do not wrap power adapter cord around the unit. Do not hang the unit by power adapter cord.
WARNING
• The inner lining is washable, but do not attempt to machine wash outer fabric.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
• Do not wring out
• Do not dry using a tumble dryer
• Do not iron
• Do not dry clean.
• Don't connect the Feet Warmer 1000 to power supply to dry it.
• Don't dry it in the sun or iron it, which will cause safety problems because of the aging of the insulating layer.
• Do not use an appliance such as a hair dryer to dry it
O
I
O
HEALTH
Feetwarmer 1000
2
3
1
Only use the power adapter supplied. Do not use other adapters, as this may
damage the device.
The wall outlet for the power supply must be close and accessible.
3
3
2
2
40C
This product is in compliance with the essential requirements and other relevant
provisions of the directive 2004/108/EC.
The Declaration of conformity can be found on:
http://www.topcom.net/cedeclarations.asp
HL_Feetwarmer 1000.book Page 4 Monday, May 30, 2011 3:04 PM
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom FEETWARMER 1000 - FW-4790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom FEETWARMER 1000 - FW-4790 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info