Manual Topcom Diablo 100 (page 3 of 36) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

462249

Zoom out

Zoom in

1/36

Topcom Diablo 100/Twin/Triple/Quattro 3

1 Buttons (see folding page for the picture)

1. Numerical buttons

2.Off -hook button

3. Redial / Pause button

4. Flash R/ INT

5. Direct memory button M1

6.Paging button (to retrieve the handset)

7. Mute button

2Display

3 Installation (See picture on folding page)

4Battery low indication

When the battery is empty, the handset no longer carries out operations.

Full battery Empty battery

When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal. Place the handset

on the base unit to charge.

5Operation

5.1 Outgoing calls

5.1.1 Making a phone call or redialing one of the last 5 numbers

Enter the desired telephone number or press the Redial key to dial out one of the last 5 numbers Î press the scroll keys a

few times until the desired number appears on the display

Î Press the Off-hook button to dial out Î Press the on-hook button

when you want to terminate the call.

Note: Press the Mute button during a conversation. to deactivate or activate the microphone.

Note: You can set the volume between 1-5 by pressing the scroll button .

5.1.2 Call setup with dial preparation

Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button. Î Press the Off-hook button

. The number will be dialled automatically.

Î Press the On-hook button when you want to terminate the call.

5.2 Incoming calls

When a call comes in, the handset will start to ring. Î Press the Off-hook button to answer the incoming call. To end the call press

the On-hook button .

5.3 Programming memory numbers

You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.

Press the Memory button short. The first entry will be shown on the display

Î Press and hold the Memory button until the -

icon appears on the display.

Î Enter the location (0-9) where you want to store the telephone number under. Î Enter the telephone

number you whish to store.

Î Press the Memory button again to confirm. Î You will hear a confirmation tone and the next entry will

appear. To leave the memory programming, press the on-hook button.

Note: If you wish to insert a pause, press the Redial/Pause button on the location where you want a pause of 3 sec.

5.4 Calling a memory number

Press the Memory button Î Scroll with the Up/Down keys to the entry you want to dial (0-9). Î Press the Off-hook button

. The memory number will be dialled a utomatically.

Î Press the On-hook button to terminate the call.

5.5 Direct access memory (Key 1,2,3 and M1)

The product has 3 locations (Key ‘1’, ‘2’ and ‘3’) where you can store a number under and dial it by pressing and holding one of these keys

in standby. The phone will automatically take the line and dial the number which is stored under this key. The number stored under key

‘1’ can also be dialed out by pressing the ‘M1’-key shortly in standby.

5.5.1 Programing the direct memory keys

Press the Memory button short. Press and hold the Memory button until the -icon appears on the display. Press and hold one

of the 3 direct memory keys (Key 1,2 or 3) where you want to store the number under until ‘Sx - _’ appears.

Î Enter the telephone number

you whish to store.

Î Press the Memory button again to confirm. Î You will hear a confirmation tone and the next entry will appear.

To leave the direct memory programming, press the On-hook button .

5.6 Paging

Press the Paging button on the base unit, the handset emits a ringing signal to help you find a lost handset. Press any key to stop the

ringing on all handsets.

5.7 Programming procedure

You can change the ring melodie, volume, day, time etc... by going into the program procedure: To go into the program procedure you

have to press and hold the Program button until the icon starts to flash.

Î Press the Program button again to change the first

setting. Each time you press the Program button you will confirm the previous setting and jump to the next setting:

You are online

INT = Internal communication

EXT = External communication

There are more digits on the left

There are more digits on the right

New numbers in call list Program mode

The keypad is locked - x - x = handset number

The antenna indicates the quality of reception

The antenna blinks when the handset is out of range!

Answered/Unanswered calls

Memory records are being retrieved or set up hh:mm Time: hh = hours, mm = minutes

ENGLISH

8. On hook button

9. Charge indicator/ On line (LED)

10. Call log/Scroll Up /

11. Scroll Down

12. Key lock

13. Program/Memory button /

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Diablo 100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Diablo 100 Manual

Product: