This function has to be programmed before it can be used
(see 4.16 Automatic answering).
4.3 Last number redial
• Press the Redial button. The last number dialled appears on the display.
• Press the Line button. The number will be dialled automatically.
• Press the Line button when you want to terminate the call.
4.4 Programming memory numbers
You can program 10 indirect numbers and 1 direct number ‘M1’ (of max.
24 digits) in the phone’s memory.
• Press the Set button.
• Press ‘M1’ or the number of the memory location (0-9).
• Enter the telephone number you wish to save on this memory
location.
• Press the Memory button. You will hear a confirmation tone.
Remarks :
• All memory numbers will be erased when the default settings have been reset.
• If you wish to insert a pause, press the Redial button on the location where
you want a pause.
4.5 Calling a memory number
• Press the Line button.
• Press ‘M1’ or the Memory button, followed by the number of the
memory location (0-9).
• The memory number will be dialled automatically.
• Press the Line button when you want to terminate the call.
4.6 Babycall
This function allows you to program one specific number (memory location
0) that will be dialled automatically no matter what key has been pressed,
except for the Set button. To activate this function, do the following :
• Press the Set button.
• Press numerical button ‘6’.
• Press numerical button ‘1’ to activate/deactivate this function.
• Press the Memory button. You hear a confirmation tone.
Default setting : not activated
Important : Memory number [0] has to be programmed for this function. This
function is not valid when “mem 0” is not programmed.
Cocoon 60
22
