469797

Topcom Cocoon 450 Manual

26
Zoom out
Zoom in
Previous page
1/128
Next page
Cocoon 450 26
ENGLISH
7.2.5.
Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from 2 – 7
and Economy (Toll saver). The default setting is in economy mode. In economy mode the
machine will answer after 4 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely (See “7.4. Remote Operation” on page 28.), you can hang up after the 2nd ring. You do
not need to pay connection fees and you know that you do not have any new messages.
• Press MENU
• Press up or down a few times until ‘TAD MENU’ appears
• Press OK
• Press up or down a few times until ‘RG DELAY’ appears
• Press OK
• Press up or down a few times until the desired number of rings is set
• Press OK to confirm settings
• Press ‘c’ to exit ‘TAD MENU’
7.2.6.
Setting SOS code and filtering
The SOS code is used to stop the call filter for a short period so that the base station starts to ring
during 8 seconds. The following filter options can be set on the telephone:
OFF: No filter function active
HEAR AR: This mode enables all calls to be heard through the loudspeaker of handset 1
(Call screening). The loudspeaker is switched ON during outgoing- and
incoming message playback/recording. The other handsets cannot receive
calls.
SILEN AR: All calls are immidiatly transfert to the answering machine without any ring
delay. Callers can enter the SOS code starting with ‘*’ to override this function.
The base will start to ring for 8 seconds.
VIPFUNC1: All calls are immidiatly transfert to the answering machine without any ring
delay, except when a number comes in which match with a number from the
phonebook.
VIPFUNC2: All calls will be answered by the answering machine after the ring delay, except
the one number from the phonebook. Callers can enter the SOS code starting
with ‘*’ to override this function. The base will start to ring for 8 seconds.
a. Programming the SOS code
• Press MENU
• Press up or down a few times until ‘TAD MENU’ appears
• Press OK
• Press up or down a few times until ‘SOS CODE’ appears
• Press OK
• Enter the current code (default = ‘111’)
• Press OK
• Enter the new code and press OK
• Enter again the new code for confirmation and press OK
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Cocoon 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Cocoon 450 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info