301442

Topcom butler e350 Manual

12
Zoom out
Zoom in
Previous page
1/116
Next page
12 Topcom Butler E350/Twin/Triple/Quattro
Topcom Butler E350/Twin/Triple/Quattro
7.3 Calling a number from the call list
Scroll through the call list until the desired number is shown on the display ÆPress the off-
hook button . The number will be dialled automatically.
7.4 Erasing a number from the call list
Scroll through the call list until the desired number is shown on the display ÆPress the menu
button and select ‘Delete’ Æ Press OK after the confirmation request to confirm.
7.5 Erasing all numbers from the call list
You can only erase all numbers from the call list if all are read.
Press the menu button and select ‘Delete All’ ÆPress OK after the confirmation
request to confirm.
7.6 Store a number from the call log into the phonebook memory
Scroll through the call list until the desired number is shown on the display Æ Press the menu
button and select ‘Save’. ÆEdit the name if nessesary and press OK ÆEdit the
number if nessesary and press OK.
8 Register to a Topcom Butler E350 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
• The handset subscription has been removed from the base unit (e.g. for reinitialisation)
• If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler E350 handset and base unit!!
Keep the Paging key on the base unit pressed for 4 seconds. During one minute the base
unit is in register mode and you must do the following to subscribe the handset:
Press menu button ÆUse the button to scroll to ‘System’ and press
ÆSelect ‘Register’ ÆEnter the base PIN code (default=’0000’) and press . Enter the
number of the base unit you would like to subscribe the handset to (1-4) ÆThe unit will start
searching for the base and when found it will register ÆIf the PIN is wrong, the handset will
restart the searching for the base ÆWhen the handset is registered, it will show the handset
name and at the right the handset number.
8.1 Selecting a base unit
You can switch your handset between different registered base units if you have registered
a handset to more then one base. You can manually select the base unit or automatically let
the handset choose the nearest base.
Press menu button ÆUse the button to scroll to ‘System’ and press
ÆSelect ‘Select base’ ÆSelect ‘Auto’ or the base number (1-4) by the up/down /
keys and press .
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler e350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler e350 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info