Manual Topcom butler 5500 (page 20 of 100) (English, German, Dutch, French)

298665

Zoom out

Zoom in

1/100

Topcom Butler 5500

20 Topcom Butler 5500

• Enter your password (if prompted) and confirm with OK.

• Select Send to with navigator and press OK.

• Enter the correspondent's telephone number, or look it up in the phonebook, and select Send with the left menu

key. If you select a “personal user account", the SMS will be sent using your standard telephonenumber plus the

user account number.E.g. If your personal user number is "1" and your telephone number is 123456789, your

correspondents will receive an SMS from: 1234567891.

Note: Messages sent from a personal user account are stored in the Outbox. In the outbox the messages are not

protected by a password.

9.4.6 Deleting a per

sonal user account

• Select SMS and confirm with OK.

• Select Settings with the navigator and press OK.

• Select Users and confirm with OK.

• Select Delete User with the navigator and press OK. All the personal user accounts appear on the screen.

• Using the navigator, select the account to be removed and press OK.

• Enter the system PIN (the factory setting is 0000), and select OK. The account is deleted. All the SMS messages

received by the account are deleted; those sent from the account are still saved in the Outbox.

9.5 ALLOCATING AN SMS TERMINAL NUMBER

It is possible for several SMS-enabled telephones to be connected up to the same line. So that each telephone can

continue to receive SMSs, they must be allocated different SMS terminal numbers. This is network depending! To

allocate a number:

• Press SMS.

• Select Settings with the navigator and press OK.

• Select Terminal Number with the navigator and press OK.

•The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and confirm with OK.

If you have already created personal user accounts, your Butler 5500 will not allow you to allocate a terminal number

that corresponds to an existing user number. If two SMS-enabled telephones connected up to the same line have the

same terminal number, neither will be able to receive SMSs. They must be given differing numbers.E.g. If you have

already created a user account with the number "3", you must allocate a terminal number other than "3".

If you keep the pre-set terminal number "0" in your Butler 5500 and your telephone number is 123456789, your

correspondents can continue to send you SMSs at 123456789. If you give the terminal a number other than "0", you

must tell your correspondents so that they can continue to send you SMS messages: they will need to affix the terminal

number to your telephone number.E.g. If you give your Butler 5500 the terminal number "3" and your telephone number

is 12346789, your correspondents will need to send their SMSs to: 13456789 3.

9.6 SET SMS ALERT TONE

Your handset can play a different melody, a morse beep or a discreet tone to announce a new text message.

• Press SMS to open the SMS menu.

• Select Settings and press OK.

• Select SMS Alert. and press OK.

• Scroll to Set Alert and press OK.

• Select the type of alert you want and press OK to confirm or BACK to return to the previous menu.

• Select ON or OFF and press OK to confirm the setting.

9.7 MEMORY FULL

When the memory is full, you get the screen message "Memory Full". You can no longer send or receive SMSs. To

continue to receive SMSs, you can delete some or all of the messages. To delete all the messages stored in the "Inbox"

and "Outbox":

• Select Menu and then SMS and confirm with OK.

• Select Delete Messages and press OK.

• Select All Messages with the navigator and press OK.

•The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.

B5500_Eur.Book Page 20 Tuesday, September 14, 2004 2:26 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 5500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom butler 5500 Manual

Product: