298665

Topcom butler 5500 Manual

16
Zoom out
Zoom in
Previous page
1/100
Next page
Topcom Butler 5500
16 Topcom Butler 5500
8.3.2 Flash time
• Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and press OK.
• Press or to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash time (250ms) and
press OK to confirm.
8.4 SYSTEM PIN
The System PIN is used for registering and deregistering handsets and some other optional settings. The default
System PIN is 0000.
• Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press OK.
• Enter the current PIN (Original setting 0000) and press OK.
• Enter the new PIN, press OK and enter it again.
• Press OK to confirm.
8.5 SIM COUNTRY CODE SETTINGS
You can program the Butler 5500 how to convert telephone numbers stored on your sim card when copying them to
your handset phonebook memory (See § “4 Phonebook” ).
8.5.1 International code
When you program the International code (for example ‘00’ ) all numbers stored in the SIM with ‘+’ will be replaced by
international code ‘00’ when copied to the Butler 5500 handset. If you don’t program the international code, the ‘+’-sign
will not be replaced and will be removed during SIM copy.
• Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.
• Select International code
• Enter the international prefix
• Press OK to confirm.
Remark: If there is no International code programmed or SIM entry doesn’t have a international code, the telephone
number will be copied as it is without any changes. The Country code and National code will be ignored.
8.5.2 Countr
y code setting
When you program the country (for example ‘32’ for Belgium) all numbers stored in the SIM with this country code will
be copied without country code 32 and international code. The national code will be added infront of the telephone
number.
• Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.
• Select Country code
• Enter the country code.
• Press OK to confirm.
Remark: If you add to the country code the area code, both will be removed when copied. This way you can dial
telephonenumbers without area code if needed.
8.5.3 National code
When you program the national code (for example ‘0’) and the programmed country code is matching with the country
code on the SIM, all these numbers will be copied without country code and will have this national code infront of the
telephone number.
• Press MENU then scroll to Base Settings and press OK. Scroll to SIM country setting and press OK.
• Select National code
• Enter the national code
• Press OK to confirm.
B5500_Eur.Book Page 16 Tuesday, September 14, 2004 2:26 PM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 5500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info