298730

Topcom butler 5400 Manual

14
Zoom out
Zoom in
Previous page
1/112
Next page
Topcom Butler 5400
14 Topcom Butler 5400
8 BASE SETTINGS
8.1 RINGTONE AND VOLUME
8.1.1 Ringtone
You can choose 5 different ringer melodies:
• From the standby screen, press MENU then scroll to Base settings and press OK.
• Press OK again to enter the Base Ringtone menu.
• Scroll or to the melody you want. During scrolling a sample is played. Press OK to select or BACK to
return to the previous menu.
• Press and hold BACK to return to standby.
8.1.2 Ringer volume
There are five base ringer volume levels and Off.
• From the standby screen, press MENU then scroll to Base settings and press OK.
• Scroll to Base Volume and press OK.
• The current setting is displayed. Press to increase or to decrease the volume. Press OK to confirm.
• Press and hold BACK to return to standby.
8.2 HANDSET PRIORITY
Normally, if you have more than one handset registered to your base, they all ring at the same time. However, you can
set one of them to ring before the others, so that calls can always be answered at one handset first.
• From the standby screen, press MENU then scroll to Base settings and press OK.
• Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK to select All Handsets
to make all handsets ring together.
Or
• Scroll to Select Handset and press OK. Scroll or to the handset you want to ring first. Press OK.
• Scroll or to select the number of rings at the handset before the other handsets start ringing. Press OK
to confirm.
8.3 LINE SETTINGS
8.3.1 Flash time
• Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and press OK.
• Press or to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash time (250ms) and
press OK to confirm.
8.4 SYSTEM PIN
The System PIN is used for registering and deregistering handsets and some other optional settings. The default
System PIN is 0000.
• Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press OK.
• Enter the current PIN (Original setting 0000) and press OK.
• Enter the new PIN, press OK and enter it again.
• Press OK to confirm.
8.5 SIM COUNTRY CODE SETTINGS
You can program the Butler 5400 how to convert telephone numbers stored on your sim card when copying them to
your handset phonebook memory (See § “4 Phonebook” ).
There are 3 rules how the convertion will be done:
1. If a number stored in the SIM card begins with '+' or '00', and the country code on the SIM number matches with the
programmed country code of the handset in this case, those caracters are replaced by the programmed national
code.
2. If a number stored in the SIM card begins with '+' or '00', and the country code on the SIM number does not match
with the programmed country code of the handset, in this case, '+' is replaced by international code.
3. If a number stored in the SIM card does not begin with '+' or '00', in this case, nothing is changed.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 5400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info