299647

Topcom butler 5070 i Manual

82
Zoom out
Zoom in
Previous page
1/124
Next page
82
Butler 5070
- Enter the Park Code, PARK?:
- Press NEXT to confirm.
- Enter the Base Pin Code, BASE PIN?: (standard 0000)
- Press OK to confirm.
- The display shows << WAIT >> until the handset has found it’s base station.
If the handset does not find the selected base station, the handset will return to standby mode after 2
minutes.
If the PIN code is wrong, the display shows << FAIL >>. Press ESC to leave the setting.
- Enter a name for the handset, NAME: (use the alphanumerical keypad)
- Press OK to confirm.
The base station will automatically assign a handset number (1-5). This number will be showed on the
display as the assigned internal number.
- Press OK to confirm.
- If you want to leave the setting, press ESC for more than 2 seconds.
7.11. Removing subscription of a handset to a base station
When a handset is subscribed to multi base stations, you are able to remove the subscription of a speci-
fied unit. The active base station cannot be removed.
- Press MENU when the unit is in standby mode..
- Select SYSTEM by using the UP- and DOWN keys.
- Press OK to confirm.
- Select SUBSCRIPTION by using the UP- and DOWN keys.
- Press OK to confirm.
- Press OPT.
- Select DELETE by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired base station by using the UP- and DOWN keys.
- Press OK to confirm.
7.12. Change the assigned name and number from a subscribed base station
- Press MENU when the unit is in standby mode..
- Select SYSTEM by using the UP- and DOWN keys.
- Press OK to confirm.
- Select SUBSCRIPTION by using the UP- and DOWN keys.
- Press OK to confirm.
- Press OPT.
- Select EDIT by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired base station by using the UP- and DOWN keys.
- Press OK to confirm.
- Change the name of the base station, NAME: (use the alphanumerical keypad)
To remove a character, press C.
- Press OK to confirm.
- Change the internal handset number (max 1 digits), INT. NO: (use the numerical keypad)
- Press OK to confirm.
7.13. Selecting a base station
If a handset is subscribed to different base stations, the different base set can be selected.
When you select ‘AUTO SEARCH’, the unit will search the base that has the best reception.
… 82 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 5070 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 5070 i in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info