299647

Topcom butler 5070 i Manual

70
Zoom out
Zoom in
Previous page
1/124
Next page
70
Butler 5070
3. GETTING STARTED
When you start working with the ISDN dect, you need to make some minimum settings before you can
start using the phone on your ISDN line. Please do these settings first.
3.1. National/International Prefix
The National prefix is the digit that is used to start a national telephone number (example 0) and the
international prefix are the digits that are used to start international telephone calls (mostly 00).The def-
ault settings are National prefix: 0 , International prefix: 00
The pre-setting must be not changed if the national calls start with 0 and international calls start with
00. But when you will use your telephone on a PABX, then it may be necessary to change the settings
by adding the number to take the external line. Please refer the user manual of the PABX.
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys.
- Press OK to confirm
- Enter the Base Pin code BS_PIN?: (DEFAULT: 0000)
- Press OK to confirm.
- Select PREFIX/TFER by using the UP- and DOWN keys.
- Press OK to confirm.
- Select PREFIX by using the UP- and DOWN keys.
- Press OK to confirm.
- Select NATIONAL or INTERNAT. by using the UP- and DOWN keys.
- Press OK to confirm.
- Edit the prefix if necessary via the numerical keypad (press C to erase a digit)
- Press OK to confirm.
- Press ESC to leave the menu.
3.2. MSN numbers
You must assign the ISDN number(s) of the ISDN line to the Butler 5070. All MSN numbers assigned to
the Base Station will be stored in a MSN List.
To enter the MSN numbers:
- Press MENU when the unit is in standby mode..
- Select BASE SETTING by using the UP- and DOWN keys and press OK key
- Enter the Base Pin code BS_PIN?: (DEFAULT: 0000)
- Press OK to confirm.
- Select MSN by using the UP- and DOWN keys.
- Press OK to confirm.
- Select MSN LIST by using the UP- and DOWN keys.
- Press OK to confirm. The display will indicate ‘EMPTY’
- Select OPT.
- Select NEW by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the MSN number NEW:
- Press OK to confirm.
- Press ESC to leave the setting.
Repeat this to enter all the MSN numbers that should be assigned to the Butler 5070.
3.3. Assigning an MSN number to a handset
If you assign a MSN number to a handset, this handset will ring when the assigned MSN number is cal-
led. Before you can assign a MSN number you must program the MSN numbers as indicated above.
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 5070 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 5070 i in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info