298482
27
Zoom out
Zoom in
Previous page
1/176
Next page
Butler 4056/4056C 27
Butler 4056/4056C
ENGLISH
•Press the -key for two seconds
Record the outgoing message after the beep
•Press the Stop -key to stop recording.
Note: The recording cannot exceed 2 minutes. If no outgoing message is
recorded, the prerecorded outgoing message is used.
8.4.2 Pla
yback the Outgoing Message
To check the outgoing message now set:
•Press the -key.
Note: To stop playing the welcome note briefly press the Stop -key .
8.4.3 Select outgoing messa
ge
•Press the / -key to switch between the 2 outgoing messages.
•The internal voice will confirm the set outgoing message.
Notes:
It is only possible to select an outgoing message if the answering machine is
turned on.
If the memory is full, only outgoing message 2 can be selected (only answering
without recording messages)
8.4.4 Erasing the Outgoing Messa
ge
If you erase the outgoing message, the default message will be played ‘Please call later’ .
Erase the outgoing message as follows:
Select the desired outgoing message by pressing the / -key.
•Press the key to play the outgoing message.
Keep the key pressed down when the OGM is played back.
8.5 TURNING ANSWERING MACHINE ON/OFF
If the answering machine is on, the -LED will light up and the machine will
automatically pick up the line after a number of rings (see 'Setting Number of Rings').
•Press the key for 2 secs to switch on the answering machine. A voice confirms the
setting and says which outgoing message is active (OGM 1 or OGM 2).
•Press the key for another 2 secs to switch off the answering machine. A voice confirms
the setting.
Note: Even if the answering machine is off, the machine will automatically pick
up after 10 rings in order to enable remote activation (see 8.16 Remote operation)
8.6 SETTING NUMBER OF RINGS
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine
will answer after 5 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely (see 8.16 Remote operation), you can hang up after the 2nd ring. You do not need
to pay connection fees and you know that you do not have any new messages.
•Briefly press the key. A voice will state the current number of rings.
1,2
1,2
1,2
HL_B4056_mideur.book Page 27 Thursday, August 5, 2004 9:01 AM
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 4056 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 4056 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info