298482

Topcom butler 4056 Manual

12
Zoom out
Zoom in
Previous page
1/176
Next page
12 Butler 4056/4056C
Butler 4056/4056C
•Press the Volume/Ringer key / .
•The volume level currently set appears on the display.
•Use the number keys to set the desired level (1-5).
•Press the Volume/Ringer key / to confirm your selection.
Note: You have 8 seconds to set the desired volume; if you do not, the telephone
returns to standby mode and the volume remains unchanged.
4.8 CALL DURATION INDICATOR ON THE DISPLAY
As soon as you press the Line key the call duration appears on the display (minutes-
seconds).
E.g. “ 01-20 “ for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.9 TURNING OFF THE MICROPHONE (MUTE)
It is possible to turn off the microphone during a call by pressing the Delete/Mute key . Now
you can speak freely without the caller being able to hear you.
• You are on the phone. The Line/Charge indicator (LED) on the base unit will blink
and the Call symbol appears on the display.
•Press the Delete/Mute key to turn off the microphone.
•The symbol ‘X’ appears on the display ( ).
•When you want to resume the conversation, press the Delete/Mute key again.
•The symbol ‘X’ disappears from the display ( ). The person on the other end of the line
can hear you again.
4.10 PAUSE KEY
If you dial a telephone number and you would like to add a pause to this number, press the
Pause key at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
4.11 CONFERENCE CALL (TWO INTERNAL DECT HANDSETS AND ONE
EXTERNAL CALLER)
You can have a telephone conversation with one internal and one external caller at the same
time.
•While on the line with an external caller, press the INT key twice.
•The external call is now on hold.
•‘INT‘ appears on the display.
•Dial the number of the handset you would like to include in the call.
•Once the handset dialled is answered, keep the ‘#’ key pressed for 3 seconds.
•‘CONFERENCE’ appears on the display.
• Now you are connected to one external and one internal caller (conference call).
4.12 LOCATING A MISPLACED HANDSET (PAGING)
If you cannot find the handset, briefly press the Paging key on the base unit.
All handsets subscribed with the base unit will sound a signal so you can locate the misplaced
handset. To stop the signal, briefly press the Line key on any handset.
HL_B4056_mideur.book Page 12 Thursday, August 5, 2004 9:01 AM
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 4056 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 4056 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info