300670
17
Zoom out
Zoom in
Previous page
1/140
Next page
Butler 4011/4011C 17
Butler 4011/4011C
ENGLISH
Press the Programming key .
Press the Up or Down key repeatedly until ‘KEY SETUP’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘KEY CLICK’ appears on the display.
Press the Programming key .
The current status appears on the display:
- ‘CLICK ON’: turn on key click
- ‘CLICK OFF’: turn off key click
Press the Up or Down key to make your selection.
Press the Programming key to confirm your selection.
4.21 THE R KEY (FLASH)
Press the Flash key ‘R’ to use certain services such as “call waiting” (if your telephone
company offers this feature); or to transfer calls if you use a telephone exchange (PABX). The
Flash key ‘R’ is a brief interruption of the line. You can set the flash time to 100ms or 300ms.
This is set to 100ms by default! However, if your system requires a longer flash time, do the
following:
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display
Press the Programming key .
Press the Up or Down key repeatedly until ‘RECALL’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly to select the flash time:
- SHORT = 100ms
- LONG = 300ms
Press the Programming key to confirm your selection.
4.22 CHANGING THE PIN CODE
Certain functions are only available if you know the PIN code of the telephone.
The PIN code has 4 digits. The default PIN code setting is ‘0000’. If you would like to change
the default PIN code and set your own secret code, do the following:
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘PIN CODE’ appears on the display.
Press the Programming key .
•‘OLD CODE’ appears on the display.
Enter the old PIN code. Use the number keys.
Press the Programming key .
•‘NEW CODE’ appears on the display.
Enter the new PIN code in. Use the number keys.
Press the Programming key .
•‘AGAIN’ appears on the display.
Enter the new PIN code again. Use the number keys.
Press the Programming key .
You hear a confirmation tone. The new PIN code has been set.
HL_B4011_mideur.book Page 17 Tuesday, September 7, 2004 4:49 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 4011 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 4011 c in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info