462219

Topcom Butler 3400 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6 Topcom Butler 3400/Twin/Triple/Quattro
Topcom Butler 3400/Twin/Triple/Quattro
* Only when the network sends the time/date together with the telephone number!!! On
some networks with caller ID, time and date will not be displayed
6.3 Calling a number from the Call list
Scroll through the Call list until the desired number is shown on the display. Î Press the
Line button . The number will be dialled automatically.
6.4 Erasing a number from the Call list
Scroll through the Call list until the desired number is shown on the display. Î Press and
hold the Mute button for 3 sec. to erase the number.
6.5 Store a number from the call log into the memory
Scroll through the Call list until the desired number is shown on the display. Î Press and
hold the Memory button for 3 sec.
Î Enter the memory location (0-9) where you want to
store the number.
Î Enter the Memory button again to confirm and to go back to standby.
7 Register/de-register a handset
7.1 Register to a Topcom B3400 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as
handset 1 on the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
•The handset subscription has been removed from the base unit (e.g. for reinitialisation)
• You want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler 34xx handset and base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator
on the base unit begins to blin
k rapidly. The Line/Charge indicator will blink rapidly for one
minute. During this minute, the base unit is in register mode and you must do the following
to subscribe the handset:
Press and hold the key for 3 sec, then press and hold the * key for 3 sec.
Enter the number of the base unit you would like to subscribe the handset to (1-4).
Î The
unit will start searching for the base and when found it will ask to enter the pin code (4 digits).
Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching for
the base.
Î When the handset is registered, it will show ‘HS’ followed by the handset
number.
7.2 Removing a handset
You can remove a handset from a base to allow another handset to be registered:
Press and hold the key for 3 sec, then press and hold the key for 3 sec.
Enter the pin code (0000). If the pin is wrong, the handset will go back to standby.
Enter the handset number (1-4) you want to remove
Î The unit will go back to standby is
the removal is successfully. If not, it will ask again to enter the handset number.
You can only remove existing handsets and others then the one you are
using.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Butler 3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler 3400 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info