462219
3
Zoom out
Zoom in
Previous page
1/12
Next page
Topcom Butler 3400/Twin/Triple/Quattro 3
Topcom Butler 3400/Twin/Triple/Quattro
ENGLISH
Put the handset on the base unit. The red Charge LED will lit as long as the handset is
on the base. Charge the handset for a period of 24 hours before using the handset for the
first time. To extend the battery life time, discharge the batteries completely from time to time.
As soon as the handset emits a warning tone or when the battery icon is empty, you have
to put it back on the base unit for ch
arging.
4Battery low indication
When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely: Full battery Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the ha ndset on the base unit to charge.
5Operation
5.1 Outgoing calls
5.1.1 Making a phone call or redialing the last number
Press the Line button . You will hear the dial tone. Î Enter the desired telephone
number or press the Redial key to dial out the number you last called.
Î Press the Line
button when you want to terminate the call.
5.1.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the
Mute button.
Î Press the Line button . The number will be dialled automatically. Î
Press the Line button when you want to terminate the call.
5.1.3 Redial one of the last 3 numbers dialled
Press the Redial key . The number you last called appears on the display. If you would like
to dial one of the last 3 numbers dialled, press the Redial key a few times until the desired
number appears on the display.
Î Press the Line key . Î The number shown on the
display is dialled automatically.
Î After finishing your call, press the Line key to hang up.
5.2 Incoming calls
When a call comes in, the handset will start to ring. ÎPress the Line button to answer
the incoming call.
5.3 Activate/deactivate hands free function
When you are on the phone, press the Hands free key to activate the hands free function.
Press the same button to deactivate the hands free function.
When you are calling in hands free mode and you want to change the
volume, press the Volume button.
When you use the hands free function for a long time, the batteries will be
empty more quickly !
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Butler 3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler 3400 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info