Manual Topcom Butler 3300 Duo (page 13 of 16) (English)

67321

Zoom out

Zoom in

1/16

Topcom Butler 3300/Twin/Triple/Quattro 13

Topcom Butler 3300/Twin/Triple/Quattro

ENGLISH

• Enter the number of the base unit you would like to subscribe the handset to (1-4)

• The unit will start searching for the base and when found it will ask to enter the pin code

(4 digits):

• Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching

for the base.

• When the handset is registered, it will show ‘HS’ followed by the handset number.

7.2 Subscribing a Topcom Butler 300 DECT GAP Headset

Press the Paging key on the base unit for 10 seconds until the Line/charge indicator on the

base unit starts to blink quickly. The line/charge indicator will blink quickly for one minute.

During this minute, the base unit is in subscribing mode and you must do the following to

subscribe the headset:

• Turn ON the headset by pressing the ON/OFF button until you hear two beep tones. At

the same time the red and green LED will lit ones.

• Remove the rubber cover of the power socket so that the hole of the power socket is

free. Pull out the rubber cover from the headset so that the registration key hole is free

also.

• Press the headset registration key. The red LED will flash rapidly.

– If after a few seconds the green LED flashes slowly, the registration is successful.

– If the red LED flashes slowly, the registration is failed. Repeat above procedure.

7.3 Removing a handset

You can remove a handset from a base to allow another handset to be registered:

• Press and hold the key for 3 sec, then press and hold the key for 3 sec.

• Enter the pin code (0000). If the pin is wrong, the handset will go back to standby.

• Enter the handset number (1-4) you want to remove

• The unit will go back to standby is the removal is successfully. If not, it will ask again to

enter the handset number

PIN 1234

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler 3300 Duo in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Butler 3300 Duo Manual

Product: