299638

Topcom butler 3100 Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
Topcom Butler 3100 7
ENGLISH
Put the handset on the base unit. The red Charge LED will burn.
Charge the handset for a period of 24 hours before using the handset for the first time. To extend the battery life time,
decharge the batteries completely from time to time. As soon as the handset emits a warning tone or when the battery
icon is empty, you have to put it back on the base unit.
4. BATTERY EMPTY INDICATION
When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you
have put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but
this is actually not the case. The battery capacity will decrease rapidly. We advise you to put the handset on the base
unit for the entire night so that it can be recharged thoroughly.
• Full battery
•Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal.
Place the handset on the base unit to charge.
5. OPERATION TELEPHONE
5.1 OUTGOING CALLS
5.1.1 Making a phone call
• Press the Line button . You will hear the dial tone.
• Enter the desired telephone number.
• Press the Line button when you want to terminate the call.
5.1.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button
C
/.
When you haven’t pressed a button for 30 seconds, the number you’ve already entered will disappear and the
handset returns to standby mode.
• Press the Line button . The number will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.2 INCOMING CALLS
•When a call comes in, the handset will start to ring. The LED on the base will blink.
• Press the Line button to answer the incoming call.
5.3 LAST NUMBER REDIAL
• Press the Line button .
• Press the Redial button . The last number (with max. 20 digits) will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.4 PROGRAMMING MEMORY NUMBERS
You can program 10 indirect numbers (of max. 20 digits) in the phone’s memory.
• Enter the telephone number you wish to save on this memory location.
• Press and hold the Memory button until the -icon appears on the display. Enter the memory location (0-9)
where you want to store the number.
• You will hear a confirmation tone and the -icon will turn off.
Remarks :
If you wish to insert a pause, press and hold the Redial/Pause button /P on the location where you want a
pause
HL_B3100_basicsdef_GB.fm Page 7 Monday, May 12, 2003 12:16 PM
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 3100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info