300659
88
Zoom out
Zoom in
Previous page
1/96
Next page
88 Topcom Butler 2505/2510
ESPANOL
~
8. Seleccione BASE o PORT X con las teclas y .
9. Pulse OK para validar.
10. Seleccione el número de timbrazos con las teclas y .
11. Pulse OK para validar.
Activar o Desactivar el timbre de prioridad
1. Pulse la tecla /OK para acceder al menú.
2. Seleccione ‘CONFIG’ (SETUP) con las teclas y .
3. Pulse OK.
4. Seleccione ‘PRIORIT’ (PRIORITY) con las teclas y .
5. Pulse OK.
6. Seleccione ‘SI’ (ON) o ‘NO’ (OFF) usando y .
7. Pulse OK para validar.
5.4 USAR EL TELÉFONO CON UNA CENTRALITA
Este teléfono se puede usar con una centralita privada (PABX) o una red telefónica local.
Si utiliza el teléfono en un sistema moderno, no es necesario realizar ningún ajuste especial. Con algunos sistemas
antiguos es necesario introducir una pausa después de marcar el prefijo y
antes del resto del número. El teléfono puede introducir esta pausa durante la marcación.
Para hacerlo, deberá introducir el prefijo y la longitud de la pausa. Se pueden elegir 2 prefijos para 2 centralitas
diferentes. Para eliminar la pausa, borre el prefijo de la memoria de la misma forma en que lo introdujo.
Establecer el prefijo
1. Pulse la tecla /OK para acceder al menú.
2. Seleccione ‘CONFIG’ (SETUP) con las teclas y .
3. Pulse OK.
4. Seleccione ‘CENTRAL’ (PABX) con las teclas y .
5. Pulse OK.
6. Seeccione ‘CENTR1’ (PABX1) o ‘CENTR2’ (PABX2) con las teclas y .
7. Pulse OK.
8. Introduzca el código PIN (código predeterminado = 0000).
9. Pulse OK para validar.
10. Marque el prefijo de la centralita.
11. Pulse OK para validar.
Establecer la duración de la pausa
1. Pulse la tecla /OK para acceder al menú.
2. Seleccione ‘CONFIG’ (SETUP) con las teclas y .
3. Pulse OK.
4. Seleccione PABX con las teclas y .
5. Pulse OK.
6. Seeccione ‘PAUSA’ (PAUSE) con las teclas y .
7. Pulse OK.
8. Seleccione el intervalo de la PAUSA con las teclas y .
9. Pulse OK para validar.
6. USO DE MÚLTIPLES UNIDADES PORTÁTILES
6.1 AÑADIR OTRA UNIDAD PORTÁTIL
Se pueden asociar nuevas unidades portátiles a la base siempre que soporten el protocolo DECT GAP.
La base de este teléfono acepta un máximo de 5 portátiles. Si ya cuenta con 5 portátiles y desea añadir más, antes
deberá desasociar alguno de los ya configurados para añadir el nuevo. Para asociar cualquier portátil es necesario
activar una función especial de registro en la base:
1. Pulse y mantenga oprimido el botón localizar en la base durante 6 segundos.
2. La base emitirá un sonido de bip y quedará preparada para registrar la nueva unidad portátil. Dispone de 90
segundos para registrarla después de haber pulsado el botón. Una vez seleccionada en la base la función asociar,
inicie el procedimiento desde el nuevo portátil.
B2505_eur.book Page 88 Tuesday, December 31, 2002 11:49 AM
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 2510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 2510 in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info