299627

Topcom butler 2000 c Manual

45
Zoom out
Zoom in
Previous page
1/76
Next page
Butler 2000 C
duration is shown on the display.
• To end the call, press the Hookswitch button.
• After the call, the display shows the call duration
for another 2 seconds.
5.2.2 External Call Setup with Dial Preparation
• Enter the desired telephone number.
• Press the Hookswitch button. During the
dialling, the number can be corrected by
pressing the Erase button. The maximum number
of digits you can enter is 25. If the user tries to
enter more than 25 digits, an error tone is
generated and the excessive digits are ignored.
5.2.3 Redial
The last three dialled numbers are saved in the
Redial memory. They can be called by pressing the
Redial button [R/P].
• P ress the Redial button repeatedly to step
t h rough the diff e rent numbers in the Redial
m e m o ry.
• P r ess the Hookswitch button. The Redial button
also functions as a Pause button (see 5.4 Pause).
5.2.4 Internal Calls between Handsets
If you want to talk to another handset, take the
following steps :
• Press the [INT] button.
• Enter the number of the desired handset.
• Press, the Hookswitch button of the called
handset to answer the incoming internal call.
• P r ess the Hookswitch button when you want to
t e rminate the internal call.
Note : When a handset is in communication with
another handset, you will hear a busy tone when
you try to reach one of these handsets.
5.3 External Call Transfer
When you are in communication with an extern a l
caller and you want to transfer this external call to
another internal handset, take the following steps :
• Press the [INT] button, followed by the number
of the desired handset.
• As soon as the called handset starts to ring, the
Hookswitch will be pressed. Both handsets are
now connected.
• The first handset will connect the external call to
the second handset by pressing the Hookswitch. If
the second handset doesn’t answer, press the
[INT] button again and the first handset will be
connected to the external call again.
5.4 Pause
While entering a phone number you can add a
pause to this number by pressing the Pause button
[R/P]. It should not be the first digit of a telephone
number otherwise the Pause button will be inter-
preted as a Redial button.
45
45
45
45
45
45
45
45
45
B2000C 10/9/01 11:32 am Page 45
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 2000 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 2000 c in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info