Manual Topcom butler 130 (page 21 of 33) (English, German, Dutch, French)

299621

Zoom out

Zoom in

1/33

38 39

6.10.4 Erasing a memory number

• Press the Set button.

• Press the Memory button.

• The LCD display will show “[ ]”.

• Press the memory location number (0-9).

• Press the Set button again.

6.11 Key tone ON/OFF

The key tone setting can be programmed as follows:

• Press the Set button.

• Press <4>.

• The LCD display will show the current setting of the key tone (ON/OFF).

• Press <1> for key tone ON, <2> for key tone OFF

• The LCD display will show the change.

• Press the Set button again to confirm entry.

6.12 15 minutes conversation timer

To avoid that you would forget to end a conversation or that you accidentally

press the line button without having a conversation there is a 15 minutes time

limitation after pressing the line button. Therefore, during your conversation, the

telephone will generate a warning beep after 14 minutes and 30 seconds.

To continue your conversation and to avoid the connection from being broken

automatically, press a numerical button (0-9). If no key is pressed when the timer

runs to 15 minutes, the line will be disconnected automatically.

Remark

The function can be activated and deactivated (see 9. Settings).

6.13 PABX pause function

You can program 3 groups of PABX code numbers (each of maximum 2 digits).

If the first 1 or 2 digits (according to the programmed PABX code) of the dialled

digits match one of the PABX code programmed, a pause time will be automati-

cally inserted to the dialling buffer. This pause time can also be programmed.

6.13.1 Set PABX Access Number

• Press the Set button.

• Press <3> .

• The LCD display will show “PAB[1][2][3]” to inform the user to select 1,2 or

3 PABX group.

• Press <1>, <2> or <3> to select the PABX programming group.

• The LCD display will show the present setting of the selected group.

• For example, if the PABX group 2 is disabled, it shows “PAB2=OFF”.

• Or for example, if the PABX group 2 setting is a short pause (1P) with

digits 62 as PABX code, it shows “PAB2=1P62”.

• Press <1> or <2> to select the length of the pause time

<1> - 3 seconds pause (1P at LCD)

<2> - 6 seconds pause (2P at LCD)

• Enter the PABX access number, <1>...<9>,<0>. (maximum 2 digits)

• Press the Set button to confirm the entry.

• This is the “Automatic dialling pause” time needed when dialling an outside

number between the access code and the first digit.

• Maximum 3 settings are allowed for the PABX access code and access time.

• Maximum 2 digits for each setting

• The settings will be erased after going through the procedure “6.15 Clear all

memories”.

6.13.2 Erasing a PABX group

• Press the Set button.

• Press <3>.

• The LCD display will show “PAB[1][2][3]” to inform the user to select PABX

group 1,2 or 3.

• Press <1>, <2> or <3> to select the PABX programming group.

• The LCD display will show the present setting of the selected group.

• Press the Set button to confirm the erase.

6.14 <R> Function Programmimg

• Press the Set button.

• Press <2>.

• The LCD display will show “[r]= ” the present signalling <R> key setting .

• Press function code, <2>, <3>, <4>, <5> for different flash time.

<1> = not available

<2> = Flash : 100ms (r = flash 1)

<3> = Flash : 115ms (r = flash 2)

<4> = Flash : 270ms (r = flash 3)

<5> = Flash : 600ms (r = flash 4)

• The LCD display will show the selected setting.

• Press the Set button again to confirm your entry.

6.15 Clear all memories

• Press the Set button.

• Press <1>.

Butler 130/135 Butler 130/135

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 130 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom butler 130 Manual

Product: