300651
101
Zoom out
Zoom in
Previous page
1/147
Next page
101
7.5.3 Select outgoing message
Press the Programming Key twice to go to the answering machine menu (see
'Answering Machine Menu').
Press the key to switch between the 2 outgoing messages.
The internal voice will confirm the set outgoing message.
Notes:
1 It is only possible to select an outgoing message if the answering machine is turned on. If it is not, the
internal voice will say that the answering machine is off.
2 If the memory is full, only outgoing message 2 can be selected (only answering without recording
messages)
7.5.4 Erasing the Outgoing Message
If you erase the outgoing message, the default message will be played ‘Please call later’ .
Erase the outgoing message as follows:
Press the Programming Key twice to go to the answering machine menu (see
'Answering Machine Menu').
Select the desired outgoing message by pressing the key.
Press the key to play the outgoing message.
During playback of the outgoing message, press the Erase key .
‘ERASE?’ appears on the display.
Press ‘OK’ to erase the outgoing message or press the Erase key again to cancel erase.
7.6 Turning Answering Machine On/Off
If the answering machine is on, the symbol is displayed and the machine will
automatically pick up the line after a number of rings (can be set, see 'Setting Number of
Rings').
Press the Programming Key twice to go to the answering machine menu (see
'Answering Machine Menu').
Press the:
* key to switch on the answering machine. A voice confirms the setting and says
which outgoing message is active (OGM 1 or OGM 2).
* key to switch off the answering machine. A voice confirms the setting.
Press the OK key to exit the answering machine menu.
Note: Even if the answering machine is off, the machine will automatically pick up after 10 rings in order to
enable remote activation (see 7.17 Remote operation)
7.7 Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from 2 – 9
and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine will answer
after 5 rings if there are no new messages, and after 2 rings if there are new messages. If there
are no new messages and you call your machine to check your messages remotely (see 7.17
Remote operation), you can hang up after the 3rd ring. You do not need to pay connection
fees and you know that you do not have any new messages.
Butler 1250
B1250_NL_F_D_GB 25/3/02 3:09 pm Pagina 101
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 1250 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info