299619
63
Zoom out
Zoom in
Previous page
1/93
Next page
Butler 1200/1210
The underlined procedure is only applicable to a Butler 1000, 1010, 1210 handset and base
unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator
on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly
for one minute. During this minute, the base unit is in subscribing mode and you must do the
following to subscribe the handset:
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SUB’ appears on the display.
Press the Programming key .
‘BASE _‘ appears on the display.
Enter a number of the base unit you would like to subscribe the handset to (1-4).
Use the number keypad.
Note: Each handset can be subscribed to 4 different DECT base units. Each base unit is assigned a
number from 1 to 4 in the handset. When you subscribe a new handset, you can assign a base unit
number. It is best to use ‘1’ .
‘SEARCHING’ and the symbol appears on the display.
The RFPI code (each base unit has a unique RFPI code) appears on the display and a signal
sounds when the handset has found the base unit.
Press the Programming key .
‘PIN’ appears on the display.
Enter the 4-digit PIN code of the base unit in (default PIN code is ‘0000’). Use the number
keypad.
Press the Programming key .
The handset is subscribed to the base unit.
4.23 Subscribing Butler 1210 handset on Butler 575/575+ & Cocoon100/100+ &
Butler 2000 base unit
Press the Paging key on the Butler 575/575+ or Cocoon100/100+ or Butler 2000 base unit
for +/- 15 seconds until you hear a beep. The base unit is now in subscribing mode. For 1
minute, the base unit is in subscribing mode and you have to do the following to subscribe the
handset:
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SUB’ appears on the display.
Press the Programming key .
‘BASE _‘ appears on the display.
Enter a number for the base unit to which you would like to subscribe the handset (1-4).
Use the number keypad.
‘SEARCHING’ and the symbol appear on the display.
The RFPI code (each base unit has a unique RFPI code) appears on the display and a signal
sounds once the base unit is found by the handset.
Press the Programming key .
‘PIN’ appears on the display.
Enter the 4-digit PIN code of the base unit (default PIN code is ‘1590’). Use the number keypad.
Press the Programming key .
The handset is subscribed to the base unit.
64
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom butler 1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom butler 1210 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info