403409
8
Zoom out
Zoom in
Previous page
1/117
Next page
8
TOPCOM BPM Arm 5500 XLD
8 Measurement
8.1 Important tips
This monitor automatically switches off 1 minute after the last key operation.
To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
Do not measure your blood pressure immediately after consuming a large meal. To
obtain more accurate readings, please wait one hour before measuring.
Do not smoke or drink alcohol before measuring your blood pressure.
You should not be physically tired or exhausted while taking a measurement.
It is important that you relax during measurement. Try to take 15-minutes rest
before a reading.
Do not take measurements if you are under stress or under tension.
Take your blood pressure at normal body temperature. If you are feeling cold or
hot, wait a while before taking a measurement.
If the monitor is stored at very low temperature (near freezing), have it placed at a
warm location for at least one hour before using it.
Wait about 5 minutes before taking the next pressure measurement.
During the measurement, do not talk or move your arm or hand muscles.
8.2 Procedure
Press the start/stop button to activate the device.
All segments will be displayed.
Once the actual Memory zone is displayed (U1-3), press
the memory button to select the desired memory
zone.
If no button is pressed within 5 seconds, the measurement
will start automatically.
The display will show the last measurement result before
inflating the cuff to the level that is right for you.
When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to
approximately 220mmHg if the system detects that
your body needs more pressure to measure your
blood pressure.
When the measurement is completed, systolic, diastolic
and pulse will be shown simultaneously on the LCD
screen.
The blood pressure classification indicator will be
displayed.
When an irregular heartbeat is detected, ‘ is
displayed.
When a mistake was detected during measurement an
error ‘Er’ message is displayed (see “10 Troubleshoot” ).
Press the start/stop button to turn the unit off.
DIA
mmHg
SYS
mmHg
PUL/min
DIA
mmHg
SYS
mmHg
PUL/min
DIA
mmHg
SYS
mmHg
PUL/min
9
M
8
11
9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom bpm 5500 xld at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom bpm 5500 xld in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info