531050
8
Zoom out
Zoom in
Previous page
1/70
Next page
6 Topcom Babytalker 2000
Topcom Babaytalker 2000
4.5 Link
Do not place the baby unit or cables in the crib or within the arm reach of the baby
(at least 1 meter away).
When using the Babytalker the first time, it is adviced to test the connection.
Install the parent unit in the same room as the baby unit, but have at least 1 meter
between the 2 units.
When both units are switched on, the parent unit will search for the baby unit.
The green link LED on Parent Units will flash until they communicate. Once the link is
established, the LED will light continously.
The voice captured by the microphone will be audible on the parent unit.
The level of the detected speech is represented by the LED’s on top of the parent unit.
When the speech reached the maximum level, a beep will be audible.
When the connection is established, move the parent unit to the monitor room, but within
the operation range.
When there is no connection, an alert signal (double beep) will be audible (out of range
warning) and the green connection LED will blink.
Move the parent unit closer until the link is re-established.
5 Using the Babytalker 2000
5.1 Volume adjustment
There are 5 volume levels on the parent unit.
Press the volume up button to increase the volume level.
Press the volume down button to decrease the volume level.
5.2 Night Light
Press the Night Light button on the baby unit. The night light (17) will illuminate.
Press the Night Light button again to switch the light off.
5.3 Sound alert
The babies voice detection level is indicated by the number of volume indicator LED’s (1) on
top of the display.
Only when the volume of the parent unit is set to ‘Off’, a beep can inform you when the voice
level reached the red led zone.
5.4 Paging
When your parent unit is lost, you can track it by pressing the paging button on the baby unit
for 2 seconds.
The parent unit will emit a high beep tone for 30 seconds which helps you to find it very
easiliy.
Press the on/off button briefly to stop the beep.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BABYTALKER 2000 V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BABYTALKER 2000 V2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info