54477

Topcom Allure 400 Manual

5
Zoom out
Zoom in
Previous page
1/80
Next page
Topcom Allure 400 5
Topcom Allure 400
ENGLISH
7.4 Set the operator prefix code
When you have subscribed at an alternative oper-
ator it sometimes is required to dial a prefix in front
of the telephone number.
When entering the prefix, the phone will automat-
ically add the prefix in front of the dialled number.
For example:
Operator prefix:
1234
Number to be dialled :
012345678
Number dialled by the phone:
1234012345678
• Press to enter the menu
• Use / to select “
DXW2S”
• Press to enter the settings
• Use / to select “ON” or “OFF”
•Press
• Enter the prefix
•Press
• Press to exit the menu
7.5 Set the alarm
You can set a wakeup alarm in the telephone.
• Press to enter the menu
• Use / to select “
$/HUW”
• Press to enter the settings
• Use / to change the digit
• Press to move to the next digit
• Finally use / to select “ON” or “OFF”
• Press to exit the menu
7.6 Set the flash time
The R-key (flash) is used for services like “Call
waiting” (if this service is provided by your tele-
phone company) or to transfer calls when the tel-
ephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 110, 300,
600 and 1000 msec.
• Press to enter the menu
• Use / to select “
)/DVK”
• Press to enter the settings
• Use / to select
• Press to exit the menu
7.7 Ringer volume
At the back panel of the telephone you find a
switch that can set three different ring vol-
umes. Choose the most comfortable volume.
7.8 Hands-free volume
At the back panel of the telephone you find a
switch that can set three different hands-
free volumes. Choose the most suitable volume
for your use.
7.9 Set the ring tone
There are 20 different ring tones to choose from.
• Press . The current ringtone can be
heard at the highest volume
• Use / to select
• After 5 seconds the telephone will go back to
idle position
7.10 Set the LCD display contrast
There are 5 LCD contrast levels.
• Press to choose the most suitable
contrast level
• After 5 seconds the telephone will go back to
idle position
8Operation
8.1 Making a call
• Enter the telephone number
• Press to delete a wrongly entered digit
• Pick up the handset or press to make a
hands-free call
During a call made with the handset you can
switch to hands-free by pressing and hanging
up the handset.
In case the telephone is connected to a PBX sys-
tem it might be necessary to add a pause after the
PBX access code. The phone can generate a 4
second pause time.
For example:
0 P 012345678
Press to enter a pause
R/ LCD
P/ V IP
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Allure 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Allure 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info