54473

Topcom Allure 200 Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
Topcom Allure 200 7
Topcom Allure 200
ENGLISH
5.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means of the Ring Volume switch
at the bottom of the phone (Hi- , Lo- ).
5.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided by your telephone
company); or to transfer phone calls when you are using a telephone exchange (PABX).
The flashtime can be selected by the switch on the bottom of the phone (100/300/600ms).
6 CALLER ID
6.1 General information
When you have a subscription to the Caller ID service, the caller’s phone number and name (when supported by the
network) will appear on the display. If you saved the telephone number with the name in the Phone Book, the
programmed name will be shown on the display (name tagging function).
6.2 Call list
The size of the call list has been set when initializing the telephone. The phone numbers you have received more then
once, will not be stored, but the repeat indicator REP will be displayed. Every incoming number is saved in the Call List
with indication of date and time.
In standby mode the number of received calls is shown on the display ‘ALL CALLS 000 (always English). The new
message LED will blink until you have checked all New messages.
6.2.1 Scr
olling through the Call List
You can scroll through the Call list by pressing the Up - or Down button.
If no button is pressed within 15 seconds, you will return to standby mode.
6.2.2 Calling a n
umber from the Call List
• Select the desired telephone number.
• Press the Dial button . The number will be dialled automatically in handsfree mode.
If you want to dial the long prefix (see 4.5), press the dial button twice.
•Pick up the handset if you want to communicate over the handset.
6.2.3 Erasing n
umbers from the Call List
a) Erasing one number
• Select the number you wish to erase.
• Press the Erase button briefly. “ERASED” appears on the display.
• The next number in the call list is displayed.
b) Erasing the entire Call List
• Enter the Call List and select a number not indicated with VIP (see 6.3)
• Press the Erase button for 2 seconds , “ALL ERASED“ appears on the display.
When erasing the entire call list, VIP numbers will remain saved (see 6.3).
6.3 VIP list
Numbers can be protected to be removed out of the call list when selecting ‘erase all’. Therefore the number must be
assigned as VIP.
All VIP numbers are visible in the Call list, but can also be checked in a separate VIP list.
6.3.1 Assigning a n
umber to the VIP list.
• Scroll through the Call list by pressing the Up or Down button.
• Press the VIP button. The VIP icon will be displayed.
6.3.2 Selecting and calling a n
umber from the VIP List
• Press the VIP button repeatedly to scroll through the VIP list
• Press the Dial button . The number will be dialled automatically in handsfree mode.
•Pick up the handset if you want to communicate over the handset.
All_200NFEDSp.book Page 7 Tuesday, February 3, 2004 10:42 AM
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Allure 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Allure 200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info