Manual Topcom Agia (page 22 of 35) (English, German, Dutch, French)

54466

Zoom out

Zoom in

1/35

Agia

Recording a telephone conversation

You can also record an ordinary 2-way telephone conversation with this

machine.

1. Press and hold the MEMO/FAST FORWARD button (7) for 2-3 seconds

to record a 2-way telephone conversation. A long BEEP will sound.

Note: Adjust VOLUME CONTROL (13) to the minimum sound level, so the

called party cannot hear the long beep sound.

2. Reduce the VOLUME (13) if necessary to eliminate audio feedback.

3. Begin your conversation as soon as the LED-indicator (5) lights.

4. Press the STOP button (6) to end recording. A BEEP will sound and your

machine will rewind the cassette tape.

Note: Be sure to stop recording when you have finished the telephone con-

versation, otherwise the line will remain (connected) even though the handset

is replaced.

5. To play back 2-way conversation recordings, press and release the

PLAY/REWIND button (8).

6. Adjust VOLUME CONTROL (13) for comfortable listening level.

7. After the recording has played, your unit will sound 2 BEEPS and will automat-

ically rewind the microcassette tape to the beginning.

REMOTE CONTROL

IMPORTANT: Always call from a true touch tone telephone (DTMF) for remote

operation of your unit. The decoder is available as an option.

To operate your unit by remote control you first have to gain access to your unit

by using a Security Code. This unit is factory preset with code 689. However,

this security code can be changed to a maximum of 5 digits and a minimum of 1

digit.

To change the security code by remote control

1. Dial your telephone number.

2. Press the * button on hearing your OGM. The OGM stops and you hear 2

beeps,

3. Enter the security code “689”, When the code is correct you hear 2 beeps ,

When the code is wrong, you hear 3 beepsand the machine turns off. You

then have to start over,

4 Press and “1” and you hear 2 beeps.

5 . On hearing another BEEP, enter your new security code which has to consist

out of 3 digits.

6. Press . Your unit will emit 2 beeps to confirm the new security code.

* In case you have forgotten your new security code, switch off the supply and

switch it on again after 10 seconds. The machine will automatically revert to

security code 689.

* Do not use the same number for both security and CBT code (Call Break

Through).

To switch to auto-answer mode by remote control

1. Dial your telephone number.

2. After 12-14 rings, you will hear a beep.

3. Press the * button followed by the security code.

4. The OGM will play to confirm that the machine is in AUTO-ANSWER mode.

To switch off answer mode by remote control

1. After listening to all ICM’s and on hearing 2 BEEPS, press “5”.

2. 2 Beeps will sound to confirm ANSWER OFF mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Agia in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Topcom Agia Manual

Product: