737829
9
Zoom out
Zoom in
Previous page
1/18
Next page
9
FUNCTIONS
Speedy Start (P0MANUAL mode)
Press START button to speedily start the treadmill after turning on the power and putting on the
safety key. Both speed and incline will be at the lowest value. The user has to adjust them to the
desire levels manually.
There are two modes in using the MANUAL mode. One is the speedy start as described above to
use the preset parameters and accumulate the counts. The other is the count-down mode as
procedures below.
A. Use PROMGGRAM button to choose PO MANUAL then press ENTER to set
parameters. First is setting weigh. Use FAST/SLOW buttons to adjust the weigh and press
ENTER for next setting.
B. Now the AGE will be displayed. Use FAST/SLOW buttons to select the correct value
then press ENTER for next setting.
C. Choose one of count-down factors TIME, DISTANCE, CALORIES and use ENTER to
c
onfirm then press ENTER to set the value.
D. Now the selected factor and the value will be displayed. Use FAST/SLOW buttons to
select the proper value and press START to start the treadmill and finish the setting.
E. You can press STOP button to return to the previous step or START to start the treadmill.
RANDOM PROGRAM
This mode which is a profile includes speed and incline automatically generated by the program.
The user can continually choose the profiles until the one which is satisfied. It can also save the
USER mode and make adjustments until a most suitable profile is reached. The operation is as
follows:
A. Use PPROGRAM button to select RANDOM PROGRAM mode and press ENTER to profile
selection.
B. Now the dot matrix will display speed profile for 5 seconds then switch to incline profile for
another 5 seconds and recycle. Press ENTER to select the profile and forward to enter next
parameter. Press FAST button to generate new profile. This step can be con
tinued until
ENTER is pressed.
C. Now the value of the weight is displayed. Use FAST/SLOW buttons to adjust the weight and
press ENTER for next setting.
D. Now the value of the age will be displayed. Use FAST/SLOW buttons to adjust the age and
press ENTER for next setting.
E. Now the preset time 20:00 will be displayed. Use FAST/SLOW buttons to adjust for proper
time duration and press START to start the treadmill.
F. The profile can be saved as an USER profile when the workout is finished. The USER can be
adjusted whenever is necessary.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx TRX Grand Cruiser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx TRX Grand Cruiser in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info