737820

Toorx SRX-80 Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
1
Instruction Manual
BUTTONS:
MODE To confirm all settings.
UP To select training mode and adjust function value up.
(The computer has to be in stop condition.)
DOWN To select training mode and adjust function value down.
(The computer has to be in stop condition.)
RESET To clear the set-up value. Press RESET key and hold for 2 seconds to reset all
function figures.
FUNCTIONS：
SCAN: Displays all function TIME→DISTANCE→CALORIES→ RPM/SPEED in sequence.
RPM: Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to another
display in every 6 seconds after exercise starts.
SPEED: Displays the user’s exercise speed.
TIME: 1.You can press “UP” & “DOWN” button to set target time between 0:00 to 99:00 for count
down function.
2.
It can be set up by the user or accumulated automatically for count up function.
DISTANCE: 1.Your can press “UP” & “DOWN” button to set target distance between 0:00 to 99:50 for
count down function.
2. It can be set up by the user or accumulated automatically for count up function.
CALORIES: 1.You can press “UP” & “DOWN” button to set target calories between 0 to 9990 for count
down function.
2. It can be set up by the user or accumulated automatically for count up function.
OPERATION PROCEDURE:
1. Installs 2 pieces of 1.5V #4 batteries, then the screen will display as following “Drawing A” and have
“Bi” sound at the same time.
After that, it goes to the next step to the main menu as “Drawing B”.
Drawing A Drawing B
2. Get access to the set-up mode of TIME/DISTANCE/CALORIES. When you are in each set- up
mode, for example in the time set-up mode, time value is blinking, you can press “UP” & “DOWN”
button to adjust the value and press “MODE” for confirmation. The set-up of DISTANCE,
CALORIES is the same as TIME.
3. With any signal been transmitted into the monitor, the value of TIME, DISTANCE, CALORIES start
to count up as Drawing C. When there is any function has been preset the target (TIME or
DISTANCE or CALORIES), the function will be counting down from the preset to zero while the
training starts. Once the target is achieved to zero, the monitor start to beep for 8 seconds, and the
function will be counting up from zero directly if the training is going. Press “MODE” button for
confirmation and skip to next set-up.
4. In SCAN mode shown as “Drawing C”. RPM/SPEED/TM/DIST/CAL will skip to display in every
6 seconds. The order is as follows.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx SRX-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx SRX-80 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toorx SRX-80

Toorx SRX-80 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info