14
POWER ON ,POWER OFF:
POWER ON :
Power the LCD, the screen will display for 2 seconds (picture 1) and has a long beep for 2 seconds at the same
time, then enter into standby mode.
Picture1
POWER OFF：
1. With any signal been transmitted into the monitor for 4 minutes, IC will enter into SLEEP mode.
2. With signal and keypad been transmitted, electronic watch will wake up.
OPERATION PROCEDURE
POWER ON ：
When power on (or press MODE/RESET 3 seconds)，buzzer rings 2 seconds，LCD display 2 seconds, then enter into
the standby mode.
1. Standby mode：
A. When power on, the console h enter into standby mode, MANUAL, INTERVAL, TARGET,TIME,DISTANCE,
CALORIE, PULSE, SPM, WATT, TOTAL STROKES, STROKES and SCAN will display 1 second in turn.
(picture 2~picture 12)
B. In standby mode, user don’t need to press any buttons. Electronic watch will enter into SLEEP when user don’t
transmit RPM signal and heart rate signal for 4 minutes.
