737764
11
Zoom out
Zoom in
Previous page
1/14
Next page
Computer Operation
B-6 During all training period, you may press ST/STOP to stop monitor counting at anytime.
C. Training in PROGRAM mode - press UP button until PROGRAM shows up on the upper line, press MODE to confirm.
(c1)
(c2
)
(c3
)
(c4)
C-1 The initial set program profile is P1 (c1 & c2). There are 12 training program profiles (P1-P12) available. You may press
UP/DOWN button to select the desired training profile. Press MODE button to confirm.
C-2 You may press ST/STOP button to start training directly(c3), or you may press UP, DOWN buttons to adjust resistance
level (c4). During adjustment, you will see the display changes when you press UP or DOWN button twice.
C-3
After adjustment of the training resistance, you may press ST/STOP to start training or, Optionally, set each function
data
target by following the same procedure as stated in B-2 above. The functions available for preset are: Time, Distance,
Calories, and Pulse in PROGRAM mode.(c5)
(c5)
(c6)
(c7)
C-4 After all settings are done, press ST/STOP button to start training
. You will see each preset function data counts down from
target as soon as training starts.(c6)
C-5
Once each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears on the
left-upper corner) and beep for 8 times to remind you. (c7)
C-6
You may press ST/STOP button to start training again. The function which has achieved to zero will start from previous set
data counting down, and other set function data will keep counting up or down from previous records.
C-7 During all training period, you may press ST/STOP to stop monitor counting at anytime.
D. Training in USER mode -
press UP button until USER shows up on the upper line, press MODE to confirm(d1). In USER mode,
you can set your own desired training program.
(d1)
(d2)
(d3)
(d4)
D-1
There are 16 profile units that you can set the desired resistance level for each unit to create your own training program.
Press UP, DOWN buttons to adjust resistance level of the first
profile unit. During adjustment, you will see the display
changes when you press UP or DOWN buttons twice (d3).
Press MODE button to move to the next profile unit. Then,
use UP, DOWN buttons again to set the desired resistance
(d5)
(d6)
level until you've completed all 16 profile units. You may also adjust resistance during training.
D-2
After completing your own training program setting, you may press ST/STOP to start training or, optionally, set each functi
on
data target by following the same procedure as stated in B-2 above. The functions available for preset are: Time, Distance,
Calories, and Pulse in USER mode. (d4)
D-3
After all settings are done, press ST/STOP button to start training. You will see each preset function data counts down from
target as soon as training starts. (d5)
D-4 O
nce each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears on the
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toorx BRX-90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toorx BRX-90 in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Toorx BRX-90

Toorx BRX-90 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info