782350
19
Zoom out
Zoom in
Previous page
1/180
Next page
19 І 180
Troubleshooting
Problem Possible Cause Help
The motor does not run. Faulty motor, power supply cable or plug.
Burned out fuses.
Have the machine checked by skilled personnel. Do not
try to repair the machine yourselves as it may be danger-
ous. Check the fuses and replace them if necessary.
The motor starts slowly
and does not reach
running speed.
Low power supply voltage. Damaged
windings. Burned out capacitor.
Ask for the Electricity Board to check the voltage availa-
ble. Have the machine motor checked by skilled person-
nel. Have the capacitor replaced by skilled personnel.
Excessive motor noise. Damaged windings. Faulty motor. Have the motor checked by skilled personnel.
The motor does not
reach full power.
Overloaded circuit due to lighting, utilities
or other motors.
Do not use other utilities or motors on the circuit to which
the cutting-off machine is connected.
Motor overheats easily Overload of the motor; inadequate
cooling of the motor
Prevent overloading the motor when cutting; remove
dust from the motor to ensure an optimum cooling of the
motor
Decrease in cutting
power when sawing
The saw blade is too small (sharpened
too often)
Re-adjust the end stop of the saw unit
The saw cut is rough or
wavy
The saw blade is dull; the tooth shape is
not suited to the thickness of the material
Re-sharpen the saw blade or use an appropriate saw
blade
The work piece rips or
splinters
The cutting pressure is excessive or the
saw blade is not suited to the application
Use the correct saw blade
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolson KGZ4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolson KGZ4400 in the language / languages: All languages as an attachment in your email.

The manual is 6.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info