Manual Toolland FT5130 (page 4 of 22) (English, German, Dutch, French, Portuguese, Spanish)

622631

Zoom out

Zoom in

1/22

FT5130

V. 01 – 07/07/2015 4 ©Velleman nv

4. Features

 infrared ceramic heater with thermocouple safety and tilting reflector

 for outdoor use

 mounting bracket

 can be used with butane and propane gas

 compact design

5. Operation

5.1 Installation

1. Make sure all components are standing safely.

2. Use a clamping screw to fix the holder on the bottle.

3. Screw the pressure controller and the gas hose on the valve of the gas cylinder.

4. Use the butterfly nut and the chrysanthemum gasket to put the heater to the required position. Fix it on the

stand.

5. Screw the other end of the gas hose to the safety valve. Make sure all the screws are tight.

5.2 Connection to the Gas Cylinder.

Keep the gas cylinder and heater away from any open flames.

1. Use an approved regulator and a gas hose with a length between 40 cm and 50 cm. Avoid twisting the

hose.

2. Slowly turn on the regulator and check if there are no gas leaks. To do so, brush some soapy water on all

connections.

Before putting the device into operation, check for gas leaks at the screwcaps using a detection

spray or soapy water. Retighten them if necessary.

5.3 Using the Heater

Never aim the heater at the cylinder. The hose must always trail at the rear of the heater.

Never separate a switched-on heater from the gas cylinder.

start/position 1 (high)

position 2 (low)

1. Make sure the heater has been assembled correctly.

2. Open the regulator to feed the gas.

3. Turn the control knob to position 1 and hold pressed. Activate the piezo igniter to create a spark. Keep

pressing the control knob for another 10 seconds.

4. Turn the control knob to position 2 to adjust the flame.

5. To turn off the heater, interrupt the gas feeding by closing the regulator. Once the flame has died out, turn

the control knob back to position 1.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Toolland FT5130 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Toolland FT5130 Manual

Product: