574412

Toolcraft LDM 30 Manual

39
Zoom out
Zoom in
Previous page
1/85
Next page
39
12. Troubleshooting
No function or no display
• Replace the batteries for new ones or check if the batteries were inserted correctly.
Error code in the display
• Observe Chapter 11.
Defective calculation for areas or volumes
• The calculation for areas or volumes can only be correct if the measured distances are per-
pendicular to each other.
• Select in the settings (chapter 10) whether the housing length of the laser distance meter is
internally added or not for the calculation.
Depending on how the distance is measured (align the housing of the laser distance meter
with the lower or upper housing end of the side to be measured), the setting must be selected
correctly.
No measurement possible or defective measured values
• Physical properties of surfaces can lead to incorrect measurements, e.g. in mirrored surfaces
(glass, water, metal) or rough/porous surfaces (e.g. aerated concrete stones, natural stone).
Use a suitable laser target panel or, as a replacement for this, a piece of cardboard, in such
cases.
13. Maintenance and Care
The product is maintenance-free for you. Never disassemble it (except for insertion or replacing
of the batteries). Repair or maintenance work must be carried out by a specialist.
The outside of the product should only be cleaned with a clean, soft, dry cloth. Dust on the laser
exit opening or the lens of the laser sensor may be removed very easily with a soft, clean brush
and a vacuum cleaner.
Never use any aggressive cleaning agents or chemical solutions. They may damage the surface
of the casing (discolorations).
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toolcraft LDM 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toolcraft LDM 30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info